Results 1 to 4 of 4
Thread: HID conversion
04-30-2010, 03:50 AM #1
Has anyone here done it?
I'm concerned about output, so I would be looking at lower color range 4300k. But my rig is lifted, so I'm concerned about blinding people.
At the same time, I'm sick of the poor headlights. In rain conditions, sometimes I have to ask myself if I remembered to turn on the headlights.
As an alternative, I may buy some driving lights, but I haven't seen any ones that look decent locally.
04-30-2010, 03:57 AM #2
4300 actually has the highest lumens output, as long as you readjust your lights for the lift you should be fine. Do you have the factory foglights? you could make them HID and leave your headlights and that would make a big difference and you wouldnt have to worry about blinding people99 K1500 Suburban LT "THE BEAST"
Hypertech III, K&N, true dual
05-03-2010, 01:43 AM #3
Yeah, I want to avoid that bluish color, in the higher color range. It seems to be annoying, at least to me.
I don't have the factory foglights, but maybe I'll look to add those and convert.
05-04-2010, 03:13 PM #4
- Join Date
- Dec 2009
- Huntington Beach, CA
Do it. You won't regret it.....just make sure your headlights aren't all fogged out. I LOVE my hids.
1998 Suburban K2500 4x4
9" of Lift - 4.56's - Limited Slip
37" Tires - Lot's of Mods
By ChevyLover in forum Performance & FuelReplies: 1Last: 04-02-2014, 06:18 PM
By olblue91 in forum GM PowertrainReplies: 2Last: 08-03-2009, 09:21 PM
By warwagon in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 6Last: 06-10-2009, 10:22 PM
By Crawdaddy in forum Lifted & Offroad SuspensionReplies: 3Last: 09-26-2008, 02:16 PM
By dustin144 in forum Lifted & Offroad SuspensionReplies: 7Last: 09-03-2008, 02:36 PM
Tags for this Thread