Results 1 to 3 of 3
Thread: How do I Remove the Headliner?
05-01-2010, 09:27 PM #1
How do I Remove the Headliner?
Any autobody folks out there?
I have a 2010 GMC SAVANA VAN I need to partially remove the cab headliner so I can get to the support bracket so I can screw in the ceiling panel from a kit that I bought. I have a paneling kit and I am putting in the ceiling headliner for the rear of the cargo area. The instructions I have from the paneling kit are sketchy at best.
I have to remove the B pillars on the side first. Then the ceiling dome light. I guess the plastic just pops off and then you unscrew the light. Then I have to get the rear of the cab headliner down so I can screw in the ceiling panel. There are round plastic clips that need to be removed. Can I just pull them out or will that break them?
Anyone have any idea on how to do this?
Here's what I have to remove....
Last edited by 1flyfisher; 05-03-2010 at 06:44 PM.
05-03-2010, 06:48 PM #2
Here's what I need to remove. The headliner as you can see, and the side pillars.
Anyone know exactly how to pop these off?
05-04-2010, 01:07 PM #3
Anybody have an idea of how to pop off these plastic trim?
By Big_Ben in forum Chevy Truck AccessoriesReplies: 17Last Post: 02-10-2013, 10:18 PM
By sicuvitull in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 05-18-2010, 09:48 PM
By jwc9 in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 02-27-2010, 05:32 PM
By Froggy in forum Chevy Silverado Forum (GMC Sierra)Replies: 1Last Post: 11-10-2009, 05:34 AM
By schaefman in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 4Last Post: 05-22-2008, 09:00 PM