Results 1 to 4 of 4
Thread: 2009 GMC Wheel Center Caps
05-05-2010, 11:30 AM #1
2009 GMC Wheel Center Caps
How do you get the center caps out of the aluminum wheels? Do you have to remove the wheel to access the backside, or do they come out from the frontside?The Cheap-*ss Modder & Thread Killer
The Realist says, "The glass is too big".
2007 Chevy Tahoe LS
Red Sport Metallic w/ Tan Leather Interior
5.3 L FLEX w/AFM, 4A, Stock.
2013 GMC Sierra 1500 SLT Z60 4WD Crew Cab
Mineral Green Metallic w/ Tan Leather Interior
5.3 L FLEX w/AFM, 6A, Cheap-*ss Mods
32 Dump Club Member
Range V8 AFM Eliminator
05-05-2010, 11:40 AM #2
You have to take the wheel off and push them out from the back.
05-05-2010, 11:53 AM #3
Thanks, Greg. That's what I thought, since there wasn't any opening on the frontside, but I just wanted to be sure before I pulled a wheel.
05-05-2010, 12:50 PM #4
It seems the center caps are plastic. Does anyone know if there's an aluminum or metal center cap I can replace it with? Seems cheap to have plastic on a 20" aluminum wheel.
By 06 Greystone in forum Lifted & Offroad SuspensionReplies: 5Last Post: 04-03-2010, 05:16 AM
By dano8928 in forum Chevy Silverado Forum (GMC Sierra)Replies: 1Last Post: 08-31-2009, 10:07 AM
By 383man in forum Lifted & Offroad SuspensionReplies: 15Last Post: 06-21-2009, 09:49 AM
By PlasticTrucks in forum Chevy C/K Truck ForumReplies: 1Last Post: 04-19-2009, 01:03 AM
By dick in forum Lifted & Offroad SuspensionReplies: 1Last Post: 04-07-2008, 01:37 AM