GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default Heated power mirrors with turn signals

    My 05 AWD van already has the heated power mirrors but if I was to obtain a factory set that has the turn signals built in as well, would they plug right in and work, blinkers and all, without any additional wiring? Thanks.

  2. #2

    Default

    Quote Originally Posted by lseann View Post
    My 05 AWD van already has the heated power mirrors but if I was to obtain a factory set that has the turn signals built in as well, would they plug right in and work, blinkers and all, without any additional wiring? Thanks.
    To answer my own question, I recently replaced my 05 heated mirrors with some late model heated mirrors with the dual mirror feature. While I was in there I noticed that the pigtail for my old and new mirors had two empty slots, while the connector on the truck (plug in) had wires in those two slots. Took my handy circuit tester, activated the blinker and low and behold the circuit was live and blinking. So if I was to obtain a set of mirrors with the built in blinker option they would obviously plug right in and function without any additional wiring.
    Last edited by lseann; 08-31-2010 at 08:48 AM. Reason: misspelled word

  3. #3
    Jr. Apprentice
    Join Date
    Sep 2010
    Location
    Saint Clair Shores Michigan
    Posts
    22

    Default

    Are you referring to turn signals in the actual mirror glass? I don't think GM makes a van mirror with the turn signal integrated into the mirror glass. Take a look at these photos, there is a close up of the mirror with a added blind spot mirror integrated into the housing. The turn signal is also still integrated into the housing.
    I personally would like to see the signal integrated into the mirror surface. It looks cool IMO. The current signal design does have better visibility in front and side view for oncoming traffic.
    http://dealerrevs.com/gallery/20697977.html#photo

  4. #4

    Default

    Quote Originally Posted by jampg View Post
    Are you referring to turn signals in the actual mirror glass? I don't think GM makes a van mirror with the turn signal integrated into the mirror glass. Take a look at these photos, there is a close up of the mirror with a added blind spot mirror integrated into the housing. The turn signal is also still integrated into the housing.
    I personally would like to see the signal integrated into the mirror surface. It looks cool IMO. The current signal design does have better visibility in front and side view for oncoming traffic.
    http://dealerrevs.com/gallery/20697977.html#photo
    I was just referring to the GM mirrors with the turnsignals on the outside of the mirrors.

Similar Threads

  1. Replies: 4
    Last: 02-23-2010, 08:00 PM
  2. are 2008 silverado work trucks pre-wired for power mirrors/turn signals??
    By george b in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 1
    Last: 09-09-2009, 08:03 AM
  3. Any way to add signals in mirrors?
    By Tdaz250 in forum Chevy Truck Accessories
    Replies: 22
    Last: 08-17-2009, 12:55 PM
  4. 03 silverado power mirrors with turn signal
    By ChevyFarmKid in forum General Classifieds
    Replies: 7
    Last: 07-08-2009, 03:10 PM
  5. No turn signals!
    By manifoldsrme in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 0
    Last: 01-14-2008, 07:42 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •