Results 1 to 3 of 3
Thread: 2000 Suburban Trailer Brakes
05-26-2010, 11:13 AM #1
- Join Date
- Sep 2008
2000 Suburban Trailer Brakes
Does anyone out there know if my Suburban is pre-wired for a trailer brake controller? and if so can you tell me where the plug is and how to install the controller. I have a 2000 4x4 2500 suburban with a 6.0 and 4.11 gears LT with a towing package. Any input would be greatly appreciated
05-27-2010, 09:41 PM #2
I have a 2000 1500 Burb with a Tekonsha electronic brake controller...mine came with tow package wiring kit...I had it installed at a local shop...
I did find others on eBay and Amazon that come prewired for your specific vehicle...
there is a junction box under the dash...really the top left of the floor board that it plugs into and will allow the brake controller to work the electric trailer brakes when plugged into the back...
hope this helps and safe trailering....Mike - SoCal
07 Sierra 1500HD
Ultra Mammoth Wheels 17x8
Nitto Terra Grapplers - 305/70/17
Line-X Bedliner and Wheel Wells
NFab Nerf bars
CST 4" Spindle lift
08 Hybrid Tahoe - wifey's ride
McGaughy's 2/3 drop kit
22x9.5 Tyfun Wheels
Nexen Roadians 285/45/22
05-28-2010, 06:36 AM #3
- Join Date
- Jul 2009
Same here, my 1500 '02 Burb has a 7 pin hookup at the bumper (factory) but came with a harness to hook up after market brake controller. All you need is that harness to wire up brake controller.
By mpkeon in forum Lifted & Offroad SuspensionReplies: 0Last Post: 06-05-2010, 07:38 PM
By oletrkguy in forum Lifted & Offroad SuspensionReplies: 5Last Post: 04-24-2010, 02:14 PM
By john1784h in forum Chevy Silverado Forum (GMC Sierra)Replies: 8Last Post: 02-11-2010, 06:39 PM
By dyestar in forum GM PowertrainReplies: 3Last Post: 12-03-2007, 10:11 AM
By The Lizard in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 4Last Post: 06-03-2007, 04:21 PM
Tags for this Thread