Results 1 to 2 of 2
05-27-2010, 09:50 PM #1
1995 Rear Bumper Replacement/Upgrade?
The rear bumper on my '95 Suburban is rusting out. I can get an OEM replacement, but I like the newer Suburban's that have the trailer wiring socket built-in to the bumper.
(on my current bumper I removed one of the license plate lamps, enlarged the hole and mounted the RV7 socket there).
Does anyone know if a newer rear bumper will bolt up to a '95 Surburban? Or am I stuck with stock/OEM?Kirk
05-27-2010, 11:20 PM #2
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
I would measure the distance between the frame rails, and mabey someone else on here would be kind enough to do the same. I have the same model truck as your suburban and have a 10K lb, rear bumper and the 7 pin is built in but i know that was installed in 1988 with the truck at the dealer.. That might be a way to go...Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
By cwaters425 in forum Chevy Silverado Forum (GMC Sierra)Replies: 3Last Post: 01-25-2010, 11:43 AM
By Nortonisking in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 08-01-2009, 09:24 PM
By blackzzz01 in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 04-27-2009, 04:48 AM
By blackzzz01 in forum How-to GuidesReplies: 0Last Post: 04-27-2009, 04:46 AM
By Chev2tehCore in forum Audio, Video & Gadget TechReplies: 1Last Post: 08-18-2007, 01:27 PM