GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default Engine Oil Cooler Housing Leaking

    Hello all, replaced the engine oil cooler lines last weekend, got it all buttoned back up and now have a leak at the top of the Engine Oil Cooler housing. Went to the local autozone and ordered a felpro gasket kit for engine oil cooler and it comes with like 7 different gaskets in it along with some small O rings. The housing is only held on with two bolts as far as I can see, anyone ever done this before? Do I really have like 7 gaskets in there to replace or is it just the big round one? Any advice is appreciated.
    Attached Thumbnails Attached Thumbnails 2.jpg  

  2. #2


    Struggling to get my signature to show in the thread...its a 96 Burb K1500 4x4 with the 5.7 and 205k miles.

Similar Threads

  1. Engine Oil Cooler
    By asanford in forum GM Powertrain
    Replies: 1
    Last: 12-12-2009, 11:11 PM
  2. 97 Suburban water leaking blower motor and housing
    By gtaft in forum General Chevy & GM Tech Questions
    Replies: 1
    Last: 10-21-2009, 10:20 PM
  3. Engine oil cooler lines
    By in forum General Chevy & GM Tech Questions
    Replies: 2
    Last: 09-19-2009, 10:47 AM
  4. engine oil cooler lines
    By Graytop in forum General Chevy & GM Tech Questions
    Replies: 4
    Last: 12-25-2008, 01:55 PM
  5. Engine Coolant leaking
    By Musclecargirl in forum GM Powertrain
    Replies: 3
    Last: 07-19-2008, 04:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts