Results 1 to 6 of 6
06-11-2010, 05:09 PM #1
After waiting for the factory to make it, and for it to go thru the middleman's warehouse, I got my Extang Tuff Tonno last night. It really makes the truck look 'finished' and hides my toolbox like I wanted it too!
My box came out of a mini-truck so it fits between the rails w/ just a little side clearance. Alot of the 'fancy' covers have sideplates that extend into the bed space which would keep me from opening the toolbox. The dealer and his installer recomended this one as it sits on top the bedrails but doesn't use snaps [or velcro] there is a 'bead' around the edge that secures the sides and the end rail 'clicks' up to un-tension the tarp and clicking it shut pulls the tarp tight.
I like it!
Still Loyal to GM after all these years...:shocked:
2006 Impala LT 3.5L
2005 Silverado WT small cab/longbed 4x4 4.3L V6
1999 Grand Am 3.4L in TX w/ our youngest
1993 GMC Jimmy 4.3L 4 door 4x4 'Ole Rusty' - 'SOLD'
1988 S-10 small cab/longbed HT3.4L Crate Engine
1970 Nova 250 I-6, factory 3 sp floor shifter.
1968 Chevelle 'Nomad' Wagon 250 I-6 w/ 3 on da' tree.
06-11-2010, 10:58 PM #2
07 NBS Crew cab SLT 4x4
06-11-2010, 11:14 PM #3
I added three as an album, here is one
06-11-2010, 11:37 PM #4
- Join Date
- Jun 2010
i got the extang trifold hard cover. very useful thing to have
06-12-2010, 04:05 PM #5
06-21-2010, 11:35 AM #6
After rining a full tank of gas my 'all around' mileage went from 16+ to 17.75MPG so over a mile per gal better w/ the toneau and this one is the soft vinyl so it bellies a little at the cross rail supports where a flush mount and hard cover wouldn't be moving and may do better
By aboston in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 01-02-2010, 04:54 PM
By oldman in forum Chevy Colorado Forum (GMC Canyon)Replies: 2Last Post: 12-24-2008, 12:12 PM