GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 1 of 1

Hybrid View

  1. #1

    Default Need some help with my heads

    Recently I removed my intake manifold to replace my intake manifold gaskets. Upon inspection I noticed my EGR ports on the manifold were filled solid with very hard carbon build-up. After removing as much as I could, I noticed that there were no ports on the drivers side head to match the EGR ports on manifold. Is this normal, or did some where down the line were the heads replaced with the wrong heads (which is what I'm starting to believe happend seeing the engine has 364,314 miles). If so how can I tell which heads I have? It still has 4 bolt valve covers... Please help a noob out!!! Its a 94 Suburban w/5.7 non-vortec
    Last edited by 94bluebeast; 06-12-2010 at 08:40 AM. Reason: add text

Similar Threads

  1. where the heads go ???
    By daddytech in forum GM Powertrain
    Replies: 7
    Last: 05-29-2010, 03:30 PM
  2. ...Need new heads for the 6.5L TD....
    By BadBurban98 in forum GM Diesel & DuraMax
    Replies: 1
    Last: 03-26-2010, 03:38 PM
  3. LS2 heads on a 4.8L??
    By nos351wcm in forum GM Powertrain
    Replies: 0
    Last: 10-03-2009, 11:10 AM
  4. 305 heads on a 350
    By dwgmc1313 in forum GM Powertrain
    Replies: 2
    Last: 08-14-2009, 08:06 AM
  5. heads
    By L0sts0ul in forum GM Powertrain
    Replies: 2
    Last: 03-25-2008, 11:18 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •