GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 12
  1. #1

    Default anyone seen or have this...

    http://www.gcustoms.com/chevy-silver...e-p-30546.html

    I plan on lifting eventually but I'm looking into some sort of bumper too. Not sure if it's possible but I'd like to throw something like this on there as well as a Westin Bull Bar.
    I just wanna know if anyone has seen any and if they line up well or if the body lines are all wavy because of the material.
    Also feel free to crap on it if you don't like it, I'm not in love with it but I haven't seen too many aftermarket bumpers offered.

    Magnaflow is being installed tomorrow, Wohoooo!
    Last edited by Kman1022; 06-10-2010 at 11:50 AM. Reason: I suk at speeling

  2. #2
    Sr. Mechanic trapperdon's Avatar
    Join Date
    Feb 2010
    Location
    rainville ( Seattle )
    Posts
    169

    Default

    my ?? is what are you getting it for?
    to use as an air dam or to hide your bumper?
    :fighting0037:
    when in doubt, doubletap !

    - buying a new truck, one part at a time :grrrrrr:
    94 Blazer 4x4 k1500 5.7 L - aftermarket cold air intake
    Energy Suspension swaybar & upper and lower control arm bushings
    Pro Comp ES 9000 front shocks, new front drive axles,
    stainless front brake rotors & new pads,
    new Moog front end ball joints, Smittybilt black nerf bar steps,
    MB Racing rims & Hankook ATm off road tires

  3. #3

    Default

    Just to get rid of the stock looking bumper. Not using it as a functional performance part.

  4. #4

    Default

    Quote Originally Posted by Kman1022 View Post
    http://www.gcustoms.com/chevy-silver...e-p-30546.html

    I plan on lifting eventually but I'm looking into some sort of bumper too. Not sure if it's possible but I'd like to throw something like this on there as well as a Westin Bull Bar.
    I just wanna know if anyone has seen any and if they line up well or if the body lines are all wavy because of the material.
    Also feel free to crap on it if you don't like it, I'm not in love with it but I haven't seen too many aftermarket bumpers offered.

    Magnaflow is being installed tomorrow, Wohoooo!

    I have seen that installed on Silverados before. They look good...just make sure whoever paints it that they prep it WELL. If they dont sand it prior to paint you will have problems with paint chipping off.


    GMTruckClub members receive discounts off our normal rates! PM me for quotes! Check out our Films gallery - updated with over 200 Hydro Dip films!

    If it can be painted - it can be Hydro Dipped!

    Get the Gorilla!

    gorilladip.com

    sales@gorilladip.com

  5. #5

    Default

    That's good to hear man thanks. My buddy who'd be painting it is very knowledgeable. It'd be in very good hands.

  6. #6

    Default

    That is just a bumper cover not a total replacement.
    2010 Silverado LT 1500 Extended Cab Z71 4x4
    Summit White
    Cashmere Leather interior
    Line-X Bedliner
    Bushwacker Bed Rails

  7. #7

    Default

    Quote Originally Posted by mus99gt View Post
    That is just a bumper cover not a total replacement.

    Sounds like hes aware of that....he will need to remove the lower stock valance/air dam and install over the factory chrome bumber.

    One thing I was going to add I have seen one guy who rather than stick fog lights in the fog light holes..he used them as air scoops that ran to his cold air intake.

  8. #8

    Default

    Yeah I was thinking something along those lines too. I found this cover in the new Truckin' magazine. There's a real nicely modded 505hp Silverado with this bumper cover on the cover of the magazine. The guy went with mesh inserts all around and it looks really good.
    I'll try to post a pic later on.

  9. #9
    Sr. Mechanic trapperdon's Avatar
    Join Date
    Feb 2010
    Location
    rainville ( Seattle )
    Posts
    169

    Default

    Quote Originally Posted by sstoner911 View Post
    One thing I was going to add I have seen one guy who rather than stick fog lights in the fog light holes..he used them as air scoops that ran to his cold air intake.
    he could get the dual air scoop
    Attached Thumbnails Attached Thumbnails 937-TRI-POWER.jpg  

  10. #10

    Default

    Quote Originally Posted by trapperdon View Post
    he could get the dual air scoop
    Thats it! After I posted that I waqsnt sure if that was the same valance..but I guess it is.

Page 1 of 2 12 Last Post byLast Post by

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •