Results 1 to 10 of 90
Thread: Sea Foam in Vaccuum Lines
06-14-2010, 07:35 PM #1
Sea Foam in Vaccuum Lines
Did this to my truck and the wife's Ford Fusion last weekend what a difference. I put some in the Vacuum lines and in the tanks on both cars and it has made a significant difference. Her car was starting to start hard and it has completely cleared up. I also noticed today at O'riely's auto parts today that they had buy 2 get one free. Not a bad deal.
07 NBS Crew cab SLT 4x4
06-14-2010, 07:47 PM #2
Seafoam rules.When you hear hoofbeats, look for horses not zebras.
06-15-2010, 11:46 AM #3
Seafoam is the only way to go.1995 Silverado,Z71, 3-inch lift,2-inch leveling kit, SkyJacker Suspension, short ram-air intake, throttle body spacer, MSD ignition coil, straight pipes
06-17-2010, 08:12 AM #4
- Join Date
- Aug 2009
- Fort Washington, MD
I have an 04 Tahoe with the 5.3 Vortec engine. How do you Seafoam this? I use the brake booster hose on my other vehicles but cannot find it on this vehicle.
06-17-2010, 09:04 AM #5
I pull the air snorkel off and dump it right down the throttle body.
06-17-2010, 09:10 AM #6
06-17-2010, 09:40 AM #7
What's the purpose of this Seafoam stuff? What does it do?The Cheap-*ss Modder & Thread Killer
The Realist says, "The glass is too big".
2013 GMC Sierra 1500 SLT Z60 4WD Crew Cab
Mineral Green Metallic w/ Tan Leather Interior
5.3 L FLEX w/AFM, 6A, Cheap-*ss Mods
32 Dump Club Member
Range V8 AFM Eliminator
06-17-2010, 10:49 AM #8
after hearing peoples testimonies about seafoam on youtube and on forums that i'm on, i figured i'd give it a try. i was very much impressed with the results. my cherokee idle smoother and runs like a champ even more.2K Bowtie Silverado xCab 5.3L
7" Fabtech Suspension Lift + 3" Perf Acc. Body Lift
K&N Air Intake + Edelbrock Shorty Ceramic Headers + Flowmaster Super 10 Series dumped after muffler!
Bridgestone Dueler 285/75/16 on stock rims
SSBC Slotted Rotors & Pads
HID Driving & Fog Lights
(AR Bajas + ProComp 305/70/16) <-- seasonal set
06-17-2010, 12:54 PM #9
Thanks! I'll check it out. Sounds like something the Tahoe would like.
06-17-2010, 04:51 PM #10
For the tahoe, there is a big black container that has your brake fluid in it with the tubing going down, there will be ONE rubber hose going to the back of your intake manifold, disconnect it and put a funnel on the end, start the engine, and slowly pour the seafoam in. It may stall, but thats fine start it back up and keep pouring slowly.
www.youtube.com/ippielb 2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax 6.5" BDS Suspension Lift Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection 35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires EFI Live & AFE Stage 2 Intake Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder 33x13.5 Hankook rt03 18" XD Rims Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat Electric Fan Autometer Pressure, Boost, and Pyro Gauges 4.56 Gears Airlift Air Bag Suspension
By 98-chevy in forum General Chevy & GM Tech QuestionsReplies: 9Last: 09-27-2010, 08:45 AM
By FergusonT in forum Maintenance & UpkeepReplies: 24Last: 09-11-2010, 11:14 PM
By socal77k5 in forum GM PowertrainReplies: 1Last: 06-08-2010, 03:10 PM
By dsquared in forum GM PowertrainReplies: 5Last: 05-26-2010, 07:59 AM
By Chad01 in forum Performance & FuelReplies: 6Last: 02-17-2010, 12:09 PM
Tags for this Thread