Results 1 to 8 of 8
06-17-2010, 03:59 PM #1
- Join Date
- Jun 2010
Hard to steer and Poor Braking, HELP!!
Hello everyone! I just bought a 2003 Silverado 2500 W/T with the 6.0 and auto trans. The guy i bought it from recently had the power steering pump replaced as it was getting hard to steer. Apparently that didn't fix the issue, so he sold it to me.
I checked for any obvious vacuum leaks and didn't find anything. The issue is that whenever you're driving slowly (or the engine is at idle) it is insanely hard to steer, and the brakes get mushy. The main issue for me is the crazy hard steering. If you give it a little gas the power assist will generally come back. He said it had something to do with the brake booster, that they're somehow linked, i've never seen that, so i'm a bit puzzled.
Anyone heard of this??? I really want to get this resolved ASAP
It should also be mentioned, the power steering fluid is not low. It does have a bit of a whine to it when sitting, revving and turning the wheel, nothing ridiculously loud, but certainly present...
Last edited by riponfrosh; 06-17-2010 at 04:34 PM.
06-17-2010, 04:19 PM #2
What rpm does it idle at? My first thought is if there isn't enough vacuum and the power steering only works when you give it a little gas is its idling too low.
06-17-2010, 04:24 PM #3
- Join Date
- Jun 2010
idle was at 1000rpm when i just started it up, couldn't turn wheel... that idle is certainly high enough to maintain proper power steering assist... thanks though!!
06-17-2010, 04:48 PM #4
Steering box grinding? joints everywhere okay? Lines clogged up? Try flushing your lines out. Vacuum leaks, basic things to check for.
www.youtube.com/ippielb 2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax 6.5" BDS Suspension Lift Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection 35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires EFI Live & AFE Stage 2 Intake Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder 33x13.5 Hankook rt03 18" XD Rims Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat Electric Fan Autometer Pressure, Boost, and Pyro Gauges 4.56 Gears Airlift Air Bag Suspension
06-17-2010, 04:55 PM #5
The truck must have HydraBoost power brakes. Steering and braking assist are both from the power steering pump.
If the pump is OK, there must be some blockage in the lines, steering box, or brake booster preventing flow. I don't know much about them, so I can't offer much more information.When you hear hoofbeats, look for horses not zebras.
06-17-2010, 05:33 PM #6
- Join Date
- Jun 2010
It is a hydraboost, at least i think it is at it's different than anything i've seen. The power steering lines run up to where the brake booster "should" be.
I've been hunting around for vacuum leaks. I've found that if I remove the pcv valve from the valve cover it has NO effect on the idle. maybe that's how these run, but i'm used to that causing the engine to stumble. Same with removing the oil filler cap... removing it has no effect on the idle. Usually the loss of vacuum will cause irradic and poor idle.
Idle looks like about 600 once it settles down. It runs great other than the power steering/ brake issues.
EDIT: After looking around, it appears the "hydraboost" system doesn't really run on vacuum at all... so i don't believe a vacuum leak to be the culprit.
Last edited by riponfrosh; 06-17-2010 at 05:41 PM.
06-17-2010, 09:22 PM #7
I don't think a vacuum leak should be your problem if your brakes are getting mushy that most likely would have something to do with the hydraboost system, also the vacuum leak should not cause the steering to be tight
sounds like you may have a bad hydraboost component
2003 Z71 Silverado LS
Access roll up cover
Billet Grill insert
CB with PA system
Waiting to be installed
Two 8in RF HX2 punch( would have 12s but they got stolen)
12-25-2010, 02:40 AM #8
- Join Date
- Dec 2010
Did you ever figure this out? I've been searcing online for days with the exact same problem. If anyone knows what's wrong here please let me know. I have a 96 hydro boost truck with a new hydro boost valve and shop suposedly changed all the lines and tried a new pump and still can't figure out ( they put the old lines and pump back on after new didn't fix but left the new boost valve) It is almost impossible to plow snow with and I need help in the worst way.
Someone please help.........
By phoebeisis in forum Lifted & Offroad SuspensionReplies: 9Last: 10-04-2013, 08:13 AM
By meash20 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 3Last: 11-19-2012, 08:50 PM
By 2wheelmudder in forum GM PowertrainReplies: 6Last: 07-08-2010, 11:01 PM
By hbfsbull in forum General Chevy & GM Tech QuestionsReplies: 4Last: 01-02-2010, 12:39 PM
By LisaO925 in forum Chevy Silverado Forum (GMC Sierra)Replies: 5Last: 09-04-2009, 01:34 AM
Tags for this Thread