Results 1 to 3 of 3
Thread: 99 GMC brake light problem
06-22-2010, 03:05 PM #1
- Join Date
- Jun 2010
99 GMC brake light problem
my 1999 GMC Sierra 2500. the brake lights have stopped working. The third brake light still does work tho. the only other problem with the lights is that when i turn the hazards on the front left one doesnt work. I dont know if this could be related or not.
Anyone that can help me figure this out thank you very much
---------- Post added at 03:05 PM ---------- Previous post was at 02:42 PM ----------
i have checked all the fuses, none are blown. all the bulbs are good and i replaced both of the circuit boards for the rear lights. still no brake lights.
06-23-2010, 09:02 PM #2
Check the relays for the brake lights. Check the wiring harness at the frame rail to the back lights. Does left turn signal work, but the hazards don't?
1999 Chevy K2500 Suburban 350
K&N, reworked cai, Thrush cat-backs
Vinyl, cranks, floor shift, and rear air!
06-24-2010, 12:20 AM #3
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
Also your trailer wiring harness, would be something to take a look at.Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
By Jarrett in forum GM Electrical TechReplies: 8Last Post: 12-31-2009, 12:48 AM
By akagun in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 5Last Post: 05-28-2009, 11:48 PM
By RegalThunder in forum Audio, Video & Gadget TechReplies: 1Last Post: 03-28-2009, 06:24 PM
By Spicy99Tahoe in forum Audio, Video & Gadget TechReplies: 5Last Post: 05-04-2008, 01:39 AM
By McClureMD in forum Chevy Silverado Forum (GMC Sierra)Replies: 1Last Post: 08-03-2007, 10:41 PM