Results 1 to 3 of 3
Thread: Stock wheel cleaning
06-21-2010, 02:53 PM #1
- Join Date
- May 2010
Stock wheel cleaning
Does anyone know what is the best way if any, to remove or clean the white nasty corrosion from where wheel weights were put on the stock Aluminum wheels?
06-21-2010, 03:12 PM #2
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
Mothers Mag & Aluminum Wheel Polish... And a buffer, with a rougher pad on it will clean it up quite well..Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
06-21-2010, 04:13 PM #3
i've usually used brake cleaner and a rough pad.2K Bowtie Silverado xCab 5.3L
7" Fabtech Suspension Lift + 3" Perf Acc. Body Lift
K&N Air Intake + Edelbrock Shorty Ceramic Headers + Flowmaster Super 10 Series dumped after muffler!
Bridgestone Dueler 285/75/16 on stock rims
SSBC Slotted Rotors & Pads
HID Driving & Fog Lights
(AR Bajas + ProComp 305/70/16) <-- seasonal set
By rmarkey in forum Lifted & Offroad SuspensionReplies: 10Last: 04-22-2010, 05:50 AM
By Marcus in forum General Chevy & GM Tech QuestionsReplies: 0Last: 03-04-2010, 03:19 PM
By countryboy73703 in forum Lifted & Offroad SuspensionReplies: 0Last: 07-05-2009, 06:33 PM
By zuper8 in forum Chevy Truck AccessoriesReplies: 4Last: 05-21-2009, 09:34 PM
By 178kchevy in forum Chevy Truck AccessoriesReplies: 4Last: 04-06-2009, 12:27 AM
Tags for this Thread