Results 1 to 7 of 7
Thread: Help with differential cover
05-18-2007, 12:22 AM #1
Help with differential cover
Well, I'm ready to upgrade the rear differential cover. I'd like to get one that has a drain plug to make gear oil changes easier. I'm leaning towards steel instead of aluminum, since I do get off road. I checked out the JC Whitney site and all they show is the basic chrome. Anybody use anything different?
There is no way to happiness....happiness is the way.:yipi:
High Desert SoCal
93 K1500 burb (personal) 350 AT 3" Lift 250K+
02 Honda Civic LX
Looking for a 1990's Miata for an engine swap
05-18-2007, 06:47 AM #2
I'm not a huge chrome fan but look up this little number seems to be interesting and tougher for what you need. Pretty is not always better...
TA Performance rear end girdle. It's stronger than the AAM cover that was part of my SLP Auburn upfit option and also provides supports for the main caps. It comes with allen head bolts, washers and a nice gasket that looks the same as the Chevy parts (GM 26016661). The one advantage the AMM cover had is that it has a cooling channel built in; oil flung from the ring gear enters it and exits on the carrier bearings.
2007 Ford E250(Work van) (Ya, Ya, shut up!)
1996 GMC Sierra SLE 1500 5.7L/4L60E
05-18-2007, 07:57 AM #3
- Join Date
- Feb 2007
- Blog Entries
that's one bad-ass diff cover Cableguy! I'm just not sure that I want to spend $160US to buy the blasted thing. I guess that'll be at the bottom of my list of stuff to getChristopher
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
2005 Saturn ION-2 Stock 277K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
05-18-2007, 08:03 AM #4
Ya it is kinda expensive isn't it. Didn't look to big to me (Although I can't see it from side profile). I was looking for something more indestructable for unplugged. In case he got hung up in rocks. It looks cool too
BTW I've had the chrome ones and there junk for off-roading.
Chevy Truck Parts
05-18-2007, 09:59 AM #5
Chrome looks nice, but it doesn't seal well. If you go with the chrome, see if you can remove the chrome from the mating surface.Gary
99 K 1500 Suburban
78 Silverado Big 10 w/factory 454
00 S-10 Blazer
1976 Trans Am
1980 Honda CB900 Custom
05-18-2007, 10:45 AM #6
Wow, those are very cool covers. But there is no way I can justify dropping $150 on a new cover. If I ever get around to building a high horsepower rig, these would be an option, but I guess I'll poke around for a deal on a steel cover with a drain plug and maybe a temp sender port.
05-25-2007, 08:47 PM #7
The Mag-Hytec worked well for me. O-ring seal has no leaks, extra capacity for more Mobil 1, dipstick to check fluid level, temp. sending port, and drain plug. I use one on the transmission also.
Looks great and keeps things cool, unlike chrome which retains heat.1998 K-2500 Suburban
454 w/ 4L80E
Suspension Maxx T-Bar Keys Gibson Cat Back K&N Intake
Mag-Hytec trans pan and diff cover Hypertech Programmer
MSD 6A, Blaster Coil & Wires Roadmaster Active Suspension
Hummer H2 wheels w/ BFG All Terrrain T/A KO
By dranderia in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last: 01-02-2010, 09:00 PM
By Williys in forum Chevy Uplander & GM Minivan ForumReplies: 0Last: 08-08-2009, 09:31 PM
By gocubs68 in forum GM PowertrainReplies: 9Last: 05-30-2009, 09:06 AM
By CarpenterGuy in forum GM PowertrainReplies: 3Last: 08-24-2008, 07:15 PM
By brooklyn718 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 7Last: 05-19-2008, 11:55 AM
Tags for this Thread