Results 1 to 4 of 4
Thread: trimming for larger tires
07-14-2010, 04:33 PM #1
trimming for larger tires
What should I use to trim the front fender so my tires don't rub? It's an 07 Sierra Classic. I know the bumper is plastic but I obviously don't want to f it up. The tires only rub occassionally when I turn one way but it's pretty annoying.
thanks07 Sierra Classic, 5.3L, 4X4, Crew Cab
07-14-2010, 05:33 PM #2
I used a cut-off wheel and then sprayed some undercoating on that surface.
07-14-2010, 06:50 PM #3
07-14-2010, 06:55 PM #4
It's a abrasive wheel that attaches to a die grinder, there flat and round. Most automotive stores have them. Wear eye protection. I turned my front tires till they hit the fender, marked with a sharpie, removed the tires and cut. Takes about a hour for both.
By JustXtreme in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 05-07-2010, 01:16 PM
By trainergeneral in forum Wheels & TiresReplies: 0Last Post: 12-31-2009, 10:45 AM
By dnhorst in forum Wheels & TiresReplies: 0Last Post: 11-23-2009, 04:42 PM
By Jmill77 in forum Wheels & TiresReplies: 15Last Post: 10-05-2008, 08:38 PM