Results 1 to 3 of 3
07-18-2010, 11:14 PM #1
- Join Date
- Jul 2010
- PAMPA, TX
So i have a 2003 silverado 1500 rcsb with a 5.3 with flowmaster 40 series exhaust...its my daily driver truck, i drive it back and forth to school and both jobs but also take it to the track everyonce in a while and street race quite often...i am gonna get a tune by nelson performance but wanted to get a cam first and i wanted to know what size cam i should get and what else i would need...i want to be able to at least keep up with a stock ls1 trans am but still have a driveable truck...
07-19-2010, 08:47 AM #2
Performance Cam info is best answered by the pro's.
Try Crane Cams, Edelbrock, Comp Cams, etc.
Hopefully you are already letting the Motor breath better with a CAI and Headers.
If not, best to start there, then do a cam.
A new Chip Tune will definitely be in order.Pavement sucks... :grrrrrr:
1994 K1500 4x4 Ext. Cab
PCM chip and Xenon 8000k bulbs
350cu.in bored over .050"
balanced Crank, 10:1 compression
Flat top pistons,cam,ported heads
Option Racing Cold Air Intake
Holley Throttle Body Spacer
Accell Igition, 45kv coil
FloTech Headers, no CATs, dual exhuast
Goodyear Silent Armor A/T 305/70-16
Pioneer SupertunerIII CD USB Bluetooth
Kicker ZX200.2 ZX Amp
Kicker Audio COMP 10" Subwoofer
07-19-2010, 11:35 AM #3
I'd call CompCams at 1-800-999-0853, they have some nice truck cams for street and track. Edelbrocks says there LS type cams are not for trucks. Crane Cams shut down last year and was purchased by S&S and is reorganizing.
Tags for this Thread