Results 1 to 8 of 8
Thread: Engine Swap
07-18-2010, 01:13 AM #1
I have an 07 classic with the 4.8 in it, is it possible to swap the 4.8 out and put a 5.3 in? Ive heard the blocks are the same, but wouldnt i need the wiring harness and computer to run the 5.3?
07 silverado classic
2 1/2" drop shackles
Diablosport Predator :)
custom air intake
07-18-2010, 01:35 AM #2
U would need the ECU or a custom tune.. wiring is the same for the 4.8L, 5.3L, and 6.0L.Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
07-18-2010, 02:20 AM #3
basically this is a direct bolt in then? im trying to find out as much as i can cause im thinking about buying a 5.3 and modifying the engine. im not sure if i want to stroke the engine or just bore it over.
07-18-2010, 02:26 AM #4
Basic bolt in yep.. same tranny, and motor mounts. And plugs for the wiring. With a modified motor you will want a custom tune either way.
07-18-2010, 02:30 AM #5
i knew if i get the ecu for the 5.3 i still would have to get a custom tune since i was going to modify the motor. ive also heard the 6.0 would be a bolt up too, but i want to take a smaller displacement motor and build it.
07-18-2010, 02:46 AM #6
Well the 5.3L is the way to go, there are a lot of aftermarket parts available for it. And why not just build you 4.8L up as much as possible then go with forced induction for another 40-50% power increase???
07-19-2010, 04:36 PM #7
i still want to drive the truck while i build the motor, its basically my only transportation at this moment. i have thought about building a 4.8 but its hard to find peformance parts for it.
07-19-2010, 04:47 PM #8
If you go to far with the 5.3 power than you need to make the tranny more durable. If its a daily driver I would bore it, balance and blue print and add a nice mild street cam. Call CompCams after you decide what you are going to build and let them recommend a cam. Add header,exhaust and CAI and tune and it will be a good reliable dailey driver. Make sure you use the best machine shop you can fined for your machine work. I have a friend in Florida that did this to his 06 5.3 and its a really nice driver. He took it on several long trips and said it got good gas mileage and had good power when he needed it.
By Lgriffi in forum General Chevy & GM Tech QuestionsReplies: 0Last: 02-06-2010, 10:37 AM
By SilverTruck04 in forum GM PowertrainReplies: 3Last: 08-26-2009, 06:01 PM
By bareback316 in forum General Chevy & GM Tech QuestionsReplies: 6Last: 08-25-2009, 07:57 PM
By dboii313 in forum GM PowertrainReplies: 6Last: 05-03-2009, 05:55 PM
By sdrewes72 in forum Chevy C/K Truck ForumReplies: 5Last: 03-25-2009, 02:43 PM
Tags for this Thread