Results 1 to 2 of 2
Thread: were can i get instructions...
07-21-2010, 04:33 PM #1
- Join Date
- Jan 2010
were can i get instructions...
for installing a kicker amp and sub into my stock bose system?
07-27-2010, 09:14 PM #2
All you need is a "line level convertor" you splice it into your rear speaker wires, then the convertor converts it to rca type cables. Its quit simple. You still have to run power wire and a source wire to your amp to turn on and off. Crutchfield sells them, here is two different versions depending if your going to run a 2 channel or 4 channel amp. Good Luck.
2-channel line output converter
2 speaker-level inputs
2 RCA outputs
rated for stereos up to 80 watts per channel $19.99
Four-channel line output converter
4 speaker-level inputs
4 RCA outputs
rated for stereos up to 80 watts per channel $24.991999 Silverado Regular Cab Short Box
Black on Black, Line-X sprayed in bed liner
5.3 with K&N CAI, Texas Speed 220/220 cam with 112 deg LSA
Texas Speed computer Tune
American Racing Headers with Cats
4.11 gears front and back, with Eaton rear posi
Flowmaster 40series true duals
16X8 American Racing Nitros with 305/70/16 Goodyear MTR's
285's in the pic
If it ain't broke...........Give me a minute!
Im not completely useless, I can be used as a bad example...
By Cableguy in forum Audio, Video & Gadget TechReplies: 8Last Post: 11-07-2012, 05:17 PM
By 1st Synthetics in forum 1st SyntheticsReplies: 3Last Post: 05-08-2009, 12:59 PM
By omnisi in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 03-29-2009, 04:42 PM
By 96Tahoe4x4 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 0Last Post: 12-06-2007, 11:35 PM