Results 1 to 2 of 2
07-30-2010, 06:52 PM #1
- Join Date
- Oct 2009
- Tulsa, OK
I went to a shop today to check on an alignment.
They said they could do it but needed an appointment for next week sometime.
BUT, he also said if the truck has never been aligned before, the upper control
arms would need to be 'slotted' to adjust the camber, and that would cost
Can someone shed some light on this issue?
---------- Post added at 06:52 PM ---------- Previous post was at 06:37 PM ----------
Think I found some info on this:
I bet I'm not the first to be surprised with this._____________________________________________
1991 Chevy C1500 S/W Std Cab 4.3L V6, 5-spd Manual
07-30-2010, 07:06 PM #2
They have what most people call knock outs. It takes a special tool (not a expensive tool) to get them out. $100.00 seems a little high. A person who removes them on a regular basic can remove them in about 15-30 minutes.
By mrmotorhead05 in forum Lifted & Offroad SuspensionReplies: 1Last: 07-22-2010, 08:51 PM
By SGT_Z85 in forum Lifted & Offroad SuspensionReplies: 17Last: 08-25-2009, 12:04 PM
By Slim-pickins in forum Lifted & Offroad SuspensionReplies: 7Last: 08-04-2009, 09:12 PM
By 7footone in forum General Chevy & GM Tech QuestionsReplies: 4Last: 07-28-2009, 09:24 PM
By npverhey1 in forum Lifted & Offroad SuspensionReplies: 18Last: 02-04-2009, 07:56 AM
Tags for this Thread