Results 1 to 4 of 4
08-05-2010, 06:57 PM #1
- Join Date
- Sep 2009
1998 Chevrolet Silverado 5.7 Code p0340 code help
I started my truck today after having the battery disconnected for 3 day and got a CEL for P0102 and Camshaft position sensor circuit malfunction code. I checked all the wiring and it looks good can't find any issue. I also replace the camshaft position sensor to be safe. Cleared the codes, and boom. P0340 is right back. The truck is running find. It was missing badly prior to the sensor change but now runs great. I can't figure out why its still throwing that code. And to make matters worse next month my emissions inspection is due, and I'm flat broke. Please help. Thanks2007 Chevrolet Aveo 90K Miles
1998 C1500 XCab 145K, Flowmaster Exhaust, Stock Engine, 4L60E trans, Amsoil thoughout.
08-06-2010, 08:49 AM #2
This may sound strange but your alternator might be causing the problem, if the voltage regulator is going bad the stray voltage will cause weird $hit to happen to the computer.
Last edited by hundojoe; 08-06-2010 at 11:38 AM.1999 Silverado Regular Cab Short Box
Black on Black, Line-X sprayed in bed liner
5.3 with K&N CAI, Texas Speed 220/220 cam with 112 deg LSA
Texas Speed computer Tune
American Racing Headers with Cats
4.11 gears front and back, with Eaton rear posi
Flowmaster 40series true duals
16X8 American Racing Nitros with 305/70/16 Goodyear MTR's
285's in the pic
If it ain't broke...........Give me a minute!
Im not completely useless, I can be used as a bad example...
08-06-2010, 01:25 PM #3
- Join Date
- Sep 2009
I found the 20 amp fuse labeled engine 1 blows as soon as the key is turned on. There is no voltage on the 12 v supply to both the cam sensor or maf. Are they on this fuse??
08-06-2010, 10:08 PM #4
According to my wiring diagram (from Chiltons and downloaded free from the vehicle repair guides at autozone.com), those are both powered by a 20 A fuse called ENG-1, along with the O2 sensor heaters and the CANP solenoid. I would suggest you get a wiring diagram, and then it's time to find the short.'98 K1500 Suburban LS 5.7 L 4L60E NV246 ARB
'92 Ford Explorer XLT 4x4 4.0 L A4LD BW13-54 Trac-loc rear
"My toys were the greasy cogs and springs and pistons that lay around all over the place, and these, I can promise you, were far more fun to play with than most of the plastic rubbish children are given nowadays." Danny in Roald Dahl's Danny The Champion of the World
By jayfire in forum GM PowertrainReplies: 4Last: 05-17-2010, 11:10 AM
By chrissymouse in forum General Chevy & GM Tech QuestionsReplies: 3Last: 03-09-2010, 07:18 AM
By SAMMIE1081 in forum General Chevy & GM Tech QuestionsReplies: 1Last: 03-05-2010, 05:27 PM
By 1980chevyman in forum GM PowertrainReplies: 2Last: 02-27-2009, 12:16 AM
By kenwindsurf1 in forum General Chevy & GM Tech QuestionsReplies: 1Last: 08-19-2008, 05:27 AM
Tags for this Thread