Results 1 to 10 of 22
Thread: Cowl Hood/Reverse Cowl Hood
08-05-2010, 11:46 PM #1
Cowl Hood/Reverse Cowl Hood
What is a reverse cowl hood and what is the difference between a cowl hood? This link says reverse: http://www.autopartswarehouse.com/sk...ts+%26+Mirrors
This link just says cowl: http://www.andysautosport.com/chevro...k00098736.html
Other than the "cowl" looking like it has three levels, and the "reverse" having just two, I don't see any difference. On a side note, any recommendations on Bolton Premiere or GoodMark since they are both steel? $300 for a steel cowl induction hood isn't bad.2003 Silverado 2500HD 6.0L Vortec V8
2" Body Lift
3" Suspension Lift
Skyjacker Hydro 7000 Shocks
Skyjacker Steering Stabilizer
35" Tires with 20" American Racing Rims
Velocity Cold Air Intake
Billet Throttle Body Spacer
BBK Performance Headers
MBRP Cat-Back Exhaust System
DiabloSport Predator- Soon to be tuned by Diablew
"Soon to be leveling-kit"
08-05-2010, 11:51 PM #2
I'd go with GoodMark... That's what I have on my '03 Avalanche, and that's what I had on my '95 Tahoe... They are a GREAT hood with virtually no work for them to fit properly... Both hoods I got from them just bolted right up and dropped into place...
As for the difference, I can't tell ya cause I could only get one link to work... But usually a Cowl hood has the raised opening in the rear of the hood (the side closest to the sindshield) and a Ram-Air hood has the raised opening in the front of the hood... I've personally never heard the term "reverse cowl" before...
Last edited by TritonBoulder47; 08-05-2010 at 11:54 PM.
Tim a.k.a. Da' Boulder
2003 Chevrolet Avalanche Z71 - Custom Emergency Response POV
Firefighter, Fire Policeman, Ambulance Driver, Rescue Tech, Emergency Lighting Installer
Tint, 20's, Bull Bar, Intake, Exhaust, Billet Grill, Stereo, Custom Console, Emergency Equipment, and the list goes on...
08-06-2010, 10:29 AM #3
Sorry about the link not working, here is a "reverse" cowl hood:
Here is the GoodMark Steel Cowl Hood:
You can see in the reverse cowl picture that both sides of the hood are smooth until they actually reach the cowl whereas the regular cowl has the step-up look before the actual cowl. You said on your hood the opening in near the windshield, maybe with the reverse cowl it is near the bumper?
Last edited by Metaluzc; 08-06-2010 at 10:33 AM. Reason: more info
08-06-2010, 01:17 PM #4
- Join Date
- Aug 2010
Normal Cowl hood direct air directly to the center of the engine.
I would assume a reverse cowl by the shape of it directs all the air to the very front near the radiator core support area.
Just guessing tho.
08-06-2010, 01:41 PM #5
- Join Date
- Jul 2010
- winnetka ca
being these trucks have F.I.what is the purpose of these hoods other than a better look
08-06-2010, 03:39 PM #6
Well I'm guessing the principle behind the FUNCTIONAL cowl induction hood on F.I. vehicles is that it helps to bring more/cooler air into the engine compartment, and provides more space/area to help release heat from the engine. Instead of the Cold Air Intake continually sucking in the hot air from the engine, the cowl induction will bring in cooler air from outside and the raised hood will also allow the hot air circulating around the engine bay to disperse easier. Whether this actually happens or is useful is probably a matter of debate, I'm doing it more for the appearance because I think the cowl induction makes the truck look aggressive.
Last edited by Metaluzc; 08-06-2010 at 03:47 PM. Reason: typo
08-06-2010, 05:22 PM #7
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
I would stick with the Goodmark hood. I know for a fact that the under side is made by the same Co that makes the factory hoods for GM. So if you have a bug shield it will still bolt right up.. Never even heard of the other Co...08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
08-06-2010, 07:37 PM #8
Thanks man. GoodMark seems to be the leader in fair priced steel hoods.
08-07-2010, 07:04 AM #9
Attachment 19567Here is a pic of the cowl hood for the NBS silverados that dealers sell.I plan on getting one.They have one on a truck at my dealer and it looks absolutely sick.[/SIGPIC]2009 Chevy Silverado LT 1500 EXT CAB 4X4 Vortec 4.8L SFI,K&N air filter,Weathertech Floor Liners ,Weathertech Stone/Bug Deflector, Line X Spray On Bedliner, TruXport Rollup Tonneau Cover, Molded Mudguards, Viper 5701 LE 2 way Security Alarm/Remote Starter, Xm Satelite Radio,BILSTEIN 5100 rear shocks,BILSTEIN 5100 front levelling shocks,READYLIFT 2" rear lift blocks,Goodyear Wrangler Territorys -265/70R 17"
08-07-2010, 11:45 AM #10
Yeah, the cowl induction just makes the truck look so bad ass.
By gfitzge33 in forum Chevy Truck AccessoriesReplies: 2Last: 10-10-2009, 08:12 PM
By MeanGreenMachine in forum General ClassifiedsReplies: 0Last: 10-05-2009, 11:37 AM
By David8790 in forum Chevy Truck AccessoriesReplies: 0Last: 09-01-2009, 01:20 AM
By eli98 in forum Chevy Truck AccessoriesReplies: 2Last: 07-01-2009, 11:03 AM
By rings in forum Chevy Truck AccessoriesReplies: 3Last: 02-16-2009, 10:42 PM
Tags for this Thread