GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 3 123 LastLast
Results 1 to 10 of 22
  1. #1

    Default Cowl Hood/Reverse Cowl Hood

    What is a reverse cowl hood and what is the difference between a cowl hood? This link says reverse: http://www.autopartswarehouse.com/sk...ts+%26+Mirrors
    This link just says cowl: http://www.andysautosport.com/chevro...k00098736.html
    Other than the "cowl" looking like it has three levels, and the "reverse" having just two, I don't see any difference. On a side note, any recommendations on Bolton Premiere or GoodMark since they are both steel? $300 for a steel cowl induction hood isn't bad.
    2003 Silverado 2500HD 6.0L Vortec V8
    2" Body Lift
    3" Suspension Lift
    Skyjacker Hydro 7000 Shocks
    Skyjacker Steering Stabilizer
    35" Tires with 20" American Racing Rims
    Velocity Cold Air Intake
    Billet Throttle Body Spacer
    BBK Performance Headers
    MBRP Cat-Back Exhaust System
    DiabloSport Predator- Soon to be tuned by Diablew

    "Soon to be leveling-kit"

  2. #2
    Master Mechanic TritonBoulder47's Avatar
    Join Date
    Nov 2009
    Location
    Tunkhannock, PA (North East)
    Posts
    809

    Default

    I'd go with GoodMark... That's what I have on my '03 Avalanche, and that's what I had on my '95 Tahoe... They are a GREAT hood with virtually no work for them to fit properly... Both hoods I got from them just bolted right up and dropped into place...





    As for the difference, I can't tell ya cause I could only get one link to work... But usually a Cowl hood has the raised opening in the rear of the hood (the side closest to the sindshield) and a Ram-Air hood has the raised opening in the front of the hood... I've personally never heard the term "reverse cowl" before...
    Last edited by TritonBoulder47; 08-05-2010 at 11:54 PM.

    Tim a.k.a. Da' Boulder

    2003 Chevrolet Avalanche Z71 - Custom Emergency Response POV

    Firefighter, Fire Policeman, Ambulance Driver, Rescue Tech, Emergency Lighting Installer

    Tint, 20's, Bull Bar, Intake, Exhaust, Billet Grill, Stereo, Custom Console, Emergency Equipment, and the list goes on...

  3. #3

    Default

    Sorry about the link not working, here is a "reverse" cowl hood:
    Click image for larger version. 

Name:	reversecowl.jpg 
Views:	629 
Size:	4.3 KB 
ID:	19554
    Here is the GoodMark Steel Cowl Hood:
    Click image for larger version. 

Name:	cowl.jpg 
Views:	669 
Size:	38.9 KB 
ID:	19555

    You can see in the reverse cowl picture that both sides of the hood are smooth until they actually reach the cowl whereas the regular cowl has the step-up look before the actual cowl. You said on your hood the opening in near the windshield, maybe with the reverse cowl it is near the bumper?
    Last edited by Metaluzc; 08-06-2010 at 10:33 AM. Reason: more info
    2003 Silverado 2500HD 6.0L Vortec V8
    2" Body Lift
    3" Suspension Lift
    Skyjacker Hydro 7000 Shocks
    Skyjacker Steering Stabilizer
    35" Tires with 20" American Racing Rims
    Velocity Cold Air Intake
    Billet Throttle Body Spacer
    BBK Performance Headers
    MBRP Cat-Back Exhaust System
    DiabloSport Predator- Soon to be tuned by Diablew

    "Soon to be leveling-kit"

  4. #4

    Default

    Normal Cowl hood direct air directly to the center of the engine.
    I would assume a reverse cowl by the shape of it directs all the air to the very front near the radiator core support area.

    Just guessing tho.

  5. #5
    Sr. Apprentice
    Join Date
    Jul 2010
    Location
    winnetka ca
    Posts
    53

    Default hood

    being these trucks have F.I.what is the purpose of these hoods other than a better look

  6. #6

    Default

    Well I'm guessing the principle behind the FUNCTIONAL cowl induction hood on F.I. vehicles is that it helps to bring more/cooler air into the engine compartment, and provides more space/area to help release heat from the engine. Instead of the Cold Air Intake continually sucking in the hot air from the engine, the cowl induction will bring in cooler air from outside and the raised hood will also allow the hot air circulating around the engine bay to disperse easier. Whether this actually happens or is useful is probably a matter of debate, I'm doing it more for the appearance because I think the cowl induction makes the truck look aggressive.
    Last edited by Metaluzc; 08-06-2010 at 03:47 PM. Reason: typo
    2003 Silverado 2500HD 6.0L Vortec V8
    2" Body Lift
    3" Suspension Lift
    Skyjacker Hydro 7000 Shocks
    Skyjacker Steering Stabilizer
    35" Tires with 20" American Racing Rims
    Velocity Cold Air Intake
    Billet Throttle Body Spacer
    BBK Performance Headers
    MBRP Cat-Back Exhaust System
    DiabloSport Predator- Soon to be tuned by Diablew

    "Soon to be leveling-kit"

  7. #7
    Legend


    Enkeiavalanche's Avatar
    Join Date
    Apr 2010
    Location
    Piermont,NY, back in Northern NJ now, But may be in IL soon....
    Posts
    5,321

    Default

    I would stick with the Goodmark hood. I know for a fact that the under side is made by the same Co that makes the factory hoods for GM. So if you have a bug shield it will still bolt right up.. Never even heard of the other Co...
    08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X

  8. #8

    Default

    Thanks man. GoodMark seems to be the leader in fair priced steel hoods.
    2003 Silverado 2500HD 6.0L Vortec V8
    2" Body Lift
    3" Suspension Lift
    Skyjacker Hydro 7000 Shocks
    Skyjacker Steering Stabilizer
    35" Tires with 20" American Racing Rims
    Velocity Cold Air Intake
    Billet Throttle Body Spacer
    BBK Performance Headers
    MBRP Cat-Back Exhaust System
    DiabloSport Predator- Soon to be tuned by Diablew

    "Soon to be leveling-kit"

  9. #9
    Legend Bigbomber's Avatar
    Join Date
    Feb 2010
    Location
    Winnipeg,Manitoba,Canada
    Posts
    5,089

    Default

    Attachment 19567Here is a pic of the cowl hood for the NBS silverados that dealers sell.I plan on getting one.They have one on a truck at my dealer and it looks absolutely sick.
    [/SIGPIC]2009 Chevy Silverado LT 1500 EXT CAB 4X4 Vortec 4.8L SFI,K&N air filter,Weathertech Floor Liners ,Weathertech Stone/Bug Deflector, Line X Spray On Bedliner, TruXport Rollup Tonneau Cover, Molded Mudguards, Viper 5701 LE 2 way Security Alarm/Remote Starter, Xm Satelite Radio,BILSTEIN 5100 rear shocks,BILSTEIN 5100 front levelling shocks,READYLIFT 2" rear lift blocks,Goodyear Wrangler Territorys -265/70R 17"

  10. #10

    Default

    Yeah, the cowl induction just makes the truck look so bad ass.
    2003 Silverado 2500HD 6.0L Vortec V8
    2" Body Lift
    3" Suspension Lift
    Skyjacker Hydro 7000 Shocks
    Skyjacker Steering Stabilizer
    35" Tires with 20" American Racing Rims
    Velocity Cold Air Intake
    Billet Throttle Body Spacer
    BBK Performance Headers
    MBRP Cat-Back Exhaust System
    DiabloSport Predator- Soon to be tuned by Diablew

    "Soon to be leveling-kit"

Page 1 of 3 123 LastLast

Similar Threads

  1. cowl hood
    By gfitzge33 in forum Chevy Truck Accessories
    Replies: 2
    Last Post: 10-10-2009, 08:12 PM
  2. Steel Cowl Hood For Sale
    By MeanGreenMachine in forum General Classifieds
    Replies: 0
    Last Post: 10-05-2009, 11:37 AM
  3. Cowl hood dealer
    By David8790 in forum Chevy Truck Accessories
    Replies: 0
    Last Post: 09-01-2009, 01:20 AM
  4. Cowl Hood Ram Air Inserts
    By eli98 in forum Chevy Truck Accessories
    Replies: 2
    Last Post: 07-01-2009, 11:03 AM
  5. Cowl hood
    By rings in forum Chevy Truck Accessories
    Replies: 3
    Last Post: 02-16-2009, 10:42 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •