Results 1 to 6 of 6
Thread: Shock question
08-15-2010, 07:57 PM #1
hi my dad used to own a 2003 f350 fx4 and it came with rancho shocks. After he bought the truck brand new he got a pro comp lift put on and i just found his rancho shocks that are in perfect condition. i was wondering if i could put them on my truck(1998 silverado Z71)? i dont think i can but i want to see what yall have to see. Thanks1998 K1500 Ext Cab Z71 187K
285/75/16 BFG A/Ts
True Dual out the back IMCO glasspacks
Prestige APS997 Remote start
Also to come:
-torison key lift
08-15-2010, 07:58 PM #2
You will need to measure them from their bottomed out position, and check if they mount the same.. If they allow for the same suspension travel, and mount properly then yes you can it will just take some time with a tape measure..Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
08-15-2010, 08:04 PM #3
ya i will take a look. i think there longer than a stock gasoline truck shocks since they came off a diesel. and diesels normally sit higher. i will measure them and see if it can properly work.
08-15-2010, 08:15 PM #4
Well usually a 1 ton 4X4 sits higher there is no difference in Gas or diesel height.
And now that i realize that you are talking about 1ton shocks (i missed the 3 in the 350 i thought 150) i would just measure you never know.
08-15-2010, 10:01 PM #5
They won't work, The mounts are differant.
08-15-2010, 10:10 PM #6
well there ya go.......
By betts687 in forum Lifted & Offroad SuspensionReplies: 3Last Post: 01-29-2010, 08:38 PM
By rlarsen247 in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 12-08-2009, 08:24 PM
By ACracing in forum Lifted & Offroad SuspensionReplies: 6Last Post: 06-20-2009, 06:50 PM
By jiujitsu in forum Lifted & Offroad SuspensionReplies: 7Last Post: 01-05-2009, 08:13 PM