GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default even bank not firing???

    I have a 77 small block 350 I am fixing for a friend. At this point I am trying to adjust the carb (4 barrel rochester). RPM is at ~800 and I am adjusting the two mixture screws on the front base using a vaccum gauge. My problem is the right bank is setting to ~4 turns out and the left is setting to ~.5 In the past when I've done this both sides have been in close proximity to each other. Not sure what the problem is or what would cause it.

    Any ideas appreciated, thanks for your time.

  2. #2


    Buy a holley. Those stink to rebuild, and that sounds like the problem.

Similar Threads

  1. Firing order Gen question
    By stuntworks in forum GM Powertrain
    Replies: 1
    Last: 02-04-2010, 07:33 PM
  2. firing issues?
    By silvy_1994 in forum GM Powertrain
    Replies: 4
    Last: 12-01-2009, 10:02 PM
  3. 90 3/4 ton injectors not firing
    By bigjunk93yj in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 6
    Last: 03-29-2009, 07:17 AM
  4. Even critics say firing GM CEO is a bad idea
    By ChevyFan in forum The Coffee Shop ~ Chit Chat
    Replies: 1
    Last: 12-09-2008, 06:22 AM
  5. 89 suburban 5.7 350 firing order diagram
    By 89suburban350 in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 11
    Last: 08-29-2007, 06:07 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts