GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 8 of 8
  1. #1

    Default anyone taken apart wing window locks?

    I just discovered the wing window locks don't work. They look easy enough to disassemble just wondering if they were serviceable.
    Rockin a newly acquired 94' GMC Vandura 2500 cargo van.

  2. #2

    Default

    This is a little old, but I'll give it a try.
    Do you mean the vent windows in front of the door window? And by 'don't work' do you mean you can't get them open or they won't lock?

    The lock handle is held in place by a roll pin. Push it through, and the handle comes off. There are a couple of spring washers, and something threaded that can be adjusted to tighten up the handle when it's all back together. [i think that's right]

    If you haven't already figured it out, and have more questions, I'll take apart one on Da Bus to refresh my memory.

    Good luck,

    1999 Chevy K2500 Suburban 350
    K&N, reworked cai, Thrush cat-backs
    Vinyl, cranks, floor shift, and rear air!

  3. #3

    Default

    I have not messed with them, too many other projects. They do not lock, someone could easily stick a tool in and pry the lever up. The lock buttons seem to be stuck in, is there a spring the pushes these out?

  4. #4

    Default

    Uh, I was messing with mine a couple of days ago, thinking of this post...

    As I recall, there is spring inside the button. It has probably just gotten gummed up over the years. If you catch a minute, open the window, throw a towel over the paint, and spray some brake parts cleaner in the button. Work it back n forth a bit to see if that will free it up.

    In the meantime, I think I'll take mine apart tomorrow, then we'll both know!Click image for larger version. 

Name:	vent window 002.jpg 
Views:	193 
Size:	27.2 KB 
ID:	20325

    Good luck,
    Last edited by KidHauler; 08-31-2010 at 09:52 AM. Reason: added pic

  5. #5

    Default

    huh yeah looks simple enough! that pic is a great help and I like your idea of cleaning in place. I still have to finish my inverter install, hinge/bushing replacements and rack straps. the cab door check was cake to replace.

  6. #6

    Default

    ha! this did not go well. Pushed the pin out, pulled off the handle expecting to catch the button and spring. Button did not budge, so I was trying to figure out and pried a little with tool....button flew off and spring disappeared in my lawn. Searched with metal detector and jobsite magnet. Need to find replacement.

    I did figure out the problem tho. the cast piece with slots had deformed and the wings on button were bound. Solved with a flat file. Weird gota do same to drivers, well except for the losing the spring part.

  7. #7

    Default

    Well, good to hear you got it figured out, sorry about the lost spring.
    Somewhere in my yard is the one hex driver bit I need to take off the cowl, turn signals, trim pieces...

  8. #8

    Default

    A pic would help

Similar Threads

  1. WTB: wing vent glass
    By TheUnit in forum General Classifieds
    Replies: 0
    Last: 02-03-2010, 11:03 AM
  2. wing vent glass
    By TheUnit in forum General Chevy & GM Tech Questions
    Replies: 1
    Last: 10-11-2009, 12:28 PM
  3. New wing mirror?
    By Darstedly in forum The Coffee Shop ~ Chit Chat
    Replies: 7
    Last: 05-20-2009, 03:16 PM
  4. Nascar wing anyone?
    By BANDIT5.3 in forum Chevy Truck Accessories
    Replies: 0
    Last: 07-28-2008, 03:46 PM
  5. Seriously yall....a wing for an 07 silverdo??
    By NRAsticker in forum Chevy Truck Accessories
    Replies: 11
    Last: 02-25-2008, 09:40 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •