GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 12

Thread: would 285s fit

  1. #1

    Default would 285s fit

    i have an 03 sierra 4x4 would 285/75/16 fit with the stock rims, and wothout trimming my main plastic fachia?

  2. #2

    Default

    You will need a leveling kit with that size tire. Yes they will work with the stock rims.

  3. #3

    Default

    X2 I had 285's on my '07 classic with stockies, but had to get keys to stop the rubbing.

    ________2013 4C Rated__________


  4. #4

    Default

    what if i just crank the t bars

  5. #5

    Default

    Every truck is alittle differant. Some trucks you can crank the bars enough without ruining the ride others you can't. Before you try cranking the bars measure from the front wheel center cap to the fender on both sides. Write these measuements down and save in case you want to return the bars to the stock settings. Usually you get a 1/4" of lift with 1 complete turn of the torson bar bolt. You should lift the front of the truck off the ground when you make adjustments. Make you adjustments a little at a time, lower the truck and take for a ride so the torson bars can settle in with the new adjustment. If you need to make more adjustments. I know this sounds like alot of work but its the best way to adjust the bars.

  6. #6
    Master Mechanic clgoch187's Avatar
    Join Date
    Aug 2010
    Location
    Gettysburg, Pennsylvania, United States
    Posts
    900

    Default

    i got 285/75/16 bfgs on my 03 z71.....all stock and no rubbing
    03 Silverado 1500
    285/75/16 BFG's
    2 Blaupunkt 10" vW1000 subs in Subthump box
    ProComp Level Lift & 3" rear blocks

  7. #7

    Default

    As mentioned, every truck is a little differant and Z-71's do sit higher because they have stiffer torson bars from the factory. The bars used on Z-71's are also used on 3/4 ton trucks.

  8. #8

    Default

    so z71 1500s have 2500 tbars

  9. #9

    Default

    Yes they do. There are several differant 3/4 bars and the Z-71 gets the lightest or softer of the 3/4 bars.

  10. #10

    Default

    Have a 03 Chevy WT model all stock and never rubbed anything with 285/75/16 after 50K miles.

Page 1 of 2 12 Last Post byLast Post by

Similar Threads

  1. ProComp Leveling Kit with 285s.
    By Jimmiee in forum Lifted & Offroad Suspension
    Replies: 18
    Last: 07-18-2009, 06:19 PM
  2. 285s on Stock Rims?
    By c_m_chance in forum Lifted & Offroad Suspension
    Replies: 14
    Last: 07-10-2009, 06:25 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •