Results 1 to 2 of 2
Thread: 1990 305 no injector pulse
09-02-2010, 02:56 PM #1
- Join Date
- Aug 2010
1990 305 no injector pulse
I just had the valve covers off from my truck and now I have no injector pulse. One of the red wires to inj was nicked so I soldered it. Still nothing. If one of the red or blue
wires were bad would that kill the other inj green and white wires from operation?
09-02-2010, 10:30 PM #2
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
Did you get everything installed properly? because you may have crimped a wire further back in the harness, also if you hit the ignition module then you may have caused it to stop sending a signal which also tells the ECM to fire the injectors. Also how many miles are on it and have any mods been done??Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
By Falcone in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 10-29-2009, 11:20 AM
By Falcone in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 08-03-2009, 10:58 PM
By grog in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 04-14-2009, 08:00 AM
By hunterdmg in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 08-24-2008, 03:14 PM
By Steve in forum The Coffee Shop ~ Chit ChatReplies: 0Last Post: 06-05-2007, 08:49 AM
Tags for this Thread