Results 1 to 6 of 6
Thread: 3" body lift pic plz....
09-06-2010, 10:02 PM #1
3" body lift pic plz....
Can all the people with 3" body lifts plz post pics of your truck on this thread? I wanna see some pics of em. With gap guards would be great too!
-04' Silverado 4x4, 5.3 liter vortec
-20x10" 2 craves with 305/55/20 Trail grapplers
-blue interior lighting
-2 10" kicker L5's
-6" rcx ntd
09-07-2010, 07:45 PM #2
- Join Date
- Aug 2010
- Starlight, Pennsylvania, United States
09-07-2010, 08:13 PM #3
- Join Date
- May 2010
- Blog Entries
09-07-2010, 08:55 PM #4
Have you checked out Zone's suspension. They have a 1.5" bodylift, maybe just enough to stop your tire rubbing.
09-08-2010, 11:11 AM #5
no I actually just found out about zone suspension last week. I checked into the 1.5" body lift. It would probably be enough, but how hard would it be to put it on if I wanted it to be a do it yourself job?
09-08-2010, 11:19 AM #6
I've never done a Zone kit, but looking at and reading about the kit( I looked at the online instructions) it shouldn't be to bad. You don't have to mess with the steering shaft and afew other items that you would have to if you went with the 3" kit. Just read the instructions TWICE before you begin and make sure you have all the tools needed, take your time and don't skip around the instruction sheet. One thing we ALWAYS did with suspension or body lifts was as we finished one step in the instructions we marked it off so to make sure we didn't skip a step.
By bigohagen in forum Photo & Video GalleryReplies: 29Last: 06-14-2011, 09:00 PM
By tawlzer in forum Chevy S10 Forum (GMC Sonoma)Replies: 2Last: 01-27-2010, 10:59 AM
By Slim-pickins in forum Lifted & Offroad SuspensionReplies: 1Last: 12-29-2009, 01:41 PM
By dzmolek in forum Lifted & Offroad SuspensionReplies: 3Last: 06-18-2009, 01:06 PM
By greensilverado in forum General Chevy & GM Tech QuestionsReplies: 5Last: 06-17-2009, 10:39 PM
Tags for this Thread