Results 1 to 3 of 3
09-08-2010, 10:31 PM #1
- Join Date
- Aug 2010
04 rearend in a 96 sub will it work?
I have a chance to pickup a 2004 1/2 ton rear end with 373 gears and disk brakes. I have a 1996 sub 1500 with 373's and drum brakes and a bad pinion gear. Both a 10 bolt. Will this setup adapt to the 96?
09-08-2010, 10:38 PM #2
with minor changes to the system ..i would say yes !!!! as long as the abs adobs it and also the springs and shoks are at the same location !!!
WHY NOT, would be easyer to change the brakes over and fix your gear..but thats just me..lol
1996 Suburban K3500 SLT DUALLY
1988 Camaro RS 383 stroker LT1
1992 32' Aero-tek Race Boat, 600 CI BBC
WE CAN STICK A DIESEL IN ANYTHING
SPECIALIZED IN CUSTOM CONVERSIONS OF ANY KIND
09-09-2010, 05:46 AM #3
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
Make sure you check the spring perches any be sure they are in the same location and measure the distance as well.Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
By d55gmc in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 3Last Post: 07-27-2010, 11:33 AM
By burbanguy in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 9Last Post: 01-06-2010, 12:08 AM
By deancf in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 10-14-2009, 09:27 AM
By plumber_rob in forum Lifted & Offroad SuspensionReplies: 0Last Post: 08-24-2009, 07:55 PM
By bcoffman in forum General Chevy & GM Tech QuestionsReplies: 16Last Post: 06-11-2009, 01:34 PM
Tags for this Thread