GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default check engine light

    my 1997 suburban has a code p0300,p0151,p0131 .i need help how to fix the problem .

  2. #2

    Default

    All three codes could have a single cause. I'd probably start by investigating why the O2 sensors are reporting lean. "By the book" one usually starts diagnosing O2 sensor codes by checking the fuel pressure to make sure the fuel system is running right. Look for any significant vacuum leaks. I might pull the spark plugs to see if they indicate whether the engine is running lean or rich.
    '98 K1500 Suburban LS 5.7 L 4L60E NV246 ARB
    '92 Ford Explorer XLT 4x4 4.0 L A4LD BW13-54 Trac-loc rear
    "My toys were the greasy cogs and springs and pistons that lay around all over the place, and these, I can promise you, were far more fun to play with than most of the plastic rubbish children are given nowadays." Danny in Roald Dahl's Danny The Champion of the World

  3. #3

    Talking check engine light

    i will start with the O2 sensors thanks for the tip. will keep you posted
    thanks MrShorty

  4. #4

    Default

    mrShorty ,i found a exhaust leak, i fix it and the check engine light has not come on.

Similar Threads

  1. Check engine light
    By old teacher in forum GM Powertrain
    Replies: 1
    Last Post: 05-17-2010, 08:03 AM
  2. check engine light
    By DTRJAG in forum GM Powertrain
    Replies: 1
    Last Post: 11-10-2009, 05:06 PM
  3. Check Engine Light?
    By ZSI52 in forum General Chevy & GM Tech Questions
    Replies: 8
    Last Post: 06-29-2009, 09:58 PM
  4. Check Engine Light
    By Nevada Born in forum Chevy Trailblazer Forum (GMC Envoy)
    Replies: 10
    Last Post: 12-27-2008, 01:18 AM
  5. Need Help With Check Engine LIght
    By Jaystahoe in forum GM Powertrain
    Replies: 11
    Last Post: 07-23-2007, 10:11 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •