Results 1 to 5 of 5
Thread: PF 46 vs PF 48 Oil Filter
09-13-2010, 09:28 PM #1
PF 46 vs PF 48 Oil Filter
I have a left over PF 46 oil filter from my 04 Silverado 5.3. Can the PF 46 interchange with the PF 48 filter on my 10 Burban 5.3? Is there really any difference? They look to be the same size...
2010 Suburban Z71 5.3 A6, Sheer Silver, Ebony Interior
2004 Lexus RX330 AWD - Netune Blue Metalic
09-14-2010, 11:52 AM #2
Check the diameter of the gasket. If they're the same and the thread is the same, you're good to go....
09-14-2010, 08:52 PM #3
Their should be a letter stamped on the filter by the threads where is screws onto the engine. For example they used to be G's if they are both the same you can use it.
07 NBS Crew cab SLT 4x4
09-15-2010, 08:05 PM #4
09-15-2010, 08:31 PM #5
doubt it. That is the thread size and depth.
By HondaTech in forum General ClassifiedsReplies: 3Last: 06-22-2010, 03:15 PM
By Santoy956 in forum General Chevy & GM Tech QuestionsReplies: 7Last: 05-27-2010, 11:43 PM
By Falcone in forum General Chevy & GM Tech QuestionsReplies: 0Last: 06-10-2009, 03:46 PM
By MWright936 in forum General Chevy & GM Tech QuestionsReplies: 5Last: 07-25-2008, 01:31 PM
By Rumpamuro in forum GM PowertrainReplies: 2Last: 10-11-2007, 08:32 AM