GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Jr. Engineer vicar75855's Avatar
    Join Date
    Jan 2010
    Location
    Texas!
    Posts
    274
    Blog Entries
    2

    Default

    The truck had started missing similar to this before we tore into it for heads and intake gaskets. I am thinking I need to take a look at the chain, I ordered the felpro set with the front seal I have a minor leak I was going to fix anyway.

    We through a 1345 the other night that went away after my son inlaw played with the connection on distributor, heck maybe the sensor has gone south as well.

    What ever it is I think it was rearing its ugly head before we did the other repairs.

    SNL is supposed to have a comp prog for the laptop with hookups he is bringing over this weekend, I'll let ya'll know how it goes!
    2000 & 2001 Chevy Prism
    1999 K1500 Suburban 5.7 Vortec

    Shouldn't they call it Truck Tape instead??

  2. #12
    Jr. Engineer vicar75855's Avatar
    Join Date
    Jan 2010
    Location
    Texas!
    Posts
    274
    Blog Entries
    2

    Default Update!! It runs woooohooooo!!!!!

    Hey all here is an update on the truck. I changed the crank sensor and the cam sensor, the cam sensor had an odd reading 12 instead of 5volts on center pin. But that did not fix it.

    I was crawling through the forums and found a reply to somone elses missfire issue. The reply and I wish I could find it again to THANK the poster, said he had a 98 sub did the intake and got a 301, it was his main plug on the spider, one of the pins had bent. I pulled the plug and BAM bent plug on number 1!!

    I straightened the pin and all is great!

    Thanks to all those that replied ya'll have been awesome as always!!

    Wiley-the mobile
    2000 & 2001 Chevy Prism
    1999 K1500 Suburban 5.7 Vortec

    Shouldn't they call it Truck Tape instead??

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Vortec Distributor
    By rusty_buckets in forum General Chevy & GM Tech Questions
    Replies: 7
    Last Post: 02-08-2012, 02:39 AM
  2. Remove the Distributor?
    By vulcania in forum GM Powertrain
    Replies: 3
    Last Post: 05-29-2010, 09:04 AM
  3. Bad Distributor??
    By mrcaddy in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 0
    Last Post: 02-11-2010, 03:22 PM
  4. Distributor Re-install ((HELP))
    By 97BurbanSLT in forum General Chevy & GM Tech Questions
    Replies: 5
    Last Post: 04-24-2009, 05:20 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •