Results 1 to 3 of 3
Thread: 2004 Center Console Swap
09-26-2010, 11:39 AM #1
2004 Center Console Swap
Anyone know what all is needed to swap from the folding bench console/seat to the full length floor console?
There is a guy on Craigslist in my area that is getting rid of his full-length center console, and will trade for a folding one..
09-26-2010, 12:06 PM #2
09-26-2010, 12:06 PM #3
You will need the center console, and a new trim piece/glove compartment door. If you look at yours, it will go right across the center of the dash. Some people cut the trim piece to fit the console in but if you are going to trade your seat for his console, he will probably be willing to trade that trim piece as well - otherwise he would have a console-sized hole in his dash.
Also, because of the ductwork in the console, there will be some sort of duct adapter at the front that you will need to connect the vents to the ducts under the dash. The seller would have no need for that with a bench seat, so you should also get that with the console.
Other than that, its easy enough to do a console swap, and well worth the time in my opinion.
EDIT: 99'HEARTBEAT has a good link there. That shows you what needs to be done on that trim piece if you don't trade yours with the seller of the console.
Last edited by pmf608; 09-26-2010 at 12:11 PM.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck
By VOL600RR in forum Chevy Parts eBayReplies: 2Last Post: 08-04-2010, 06:23 PM
By Chevysilverado05 in forum Chevy Silverado Forum (GMC Sierra)Replies: 3Last Post: 04-08-2009, 08:56 PM
By TJLanders in forum Chevy Silverado Forum (GMC Sierra)Replies: 2Last Post: 02-04-2009, 10:38 AM
By dutzowmo in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 12-08-2008, 12:45 AM
By 984X4MO in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 09-08-2008, 07:01 PM
Tags for this Thread