Results 1 to 2 of 2
Thread: Installed radio now no power :(
09-26-2010, 11:54 AM #1
- Join Date
- Sep 2010
Installed radio now no power :(
HI all im brand new to the site i love the one for my motorcycle so one for my truck should be just as awsome i just spent last 30 min looking for my problem threw threads. I could find simmilar ones but not close enough to help me. Ok here it goes.
I installed my radio when i first got it worked great for 2 years. I took it out to install suba and amp it worked great but before i got to tape off all the power connections a wire hit frame of radio and i heard a weird noise. the wire was now dead.(edited after this point) I just checked it again i checked all the wires on the factory harness while the car was running the memory wire has the power it needs but the other orange wire that should come on when u start the car is not like it should. i checked the fuse for the radio and its not blown but it also seems not to be getting power. andyone know were i look from there?
Last edited by Robb9806; 09-26-2010 at 12:34 PM. Reason: updated info
09-26-2010, 01:00 PM #2
- Join Date
- May 2010
- Blog Entries
Well one thing I that comes to mind right away is that your wire grounded out, got hot, and melted or fused in a spot and now the wire has a short in it. Also so you hooked the factory radio back up and it worked? Also on my truck I have a radio fuse and a radio amp fuse, check both as well as the fuse on the back of your aftermarket stereo.
2006 Duramax LBZ
4'' Diamond eye to 6'' tip
16'' ion alloy, 33'' fierce attitudes
Lots of work left to do!
By procircuit58 in forum Audio, Video & Gadget TechReplies: 9Last Post: 10-30-2011, 10:27 PM
By jordanr1987 in forum Audio, Video & Gadget TechReplies: 1Last Post: 08-03-2010, 10:55 AM
By pmf608 in forum Audio, Video & Gadget TechReplies: 2Last Post: 07-27-2009, 07:45 PM
By IrishBrewer in forum Audio, Video & Gadget TechReplies: 0Last Post: 07-29-2008, 11:50 AM
By Crawdaddy in forum Audio, Video & Gadget TechReplies: 6Last Post: 03-31-2008, 10:19 AM
Tags for this Thread