GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 3 of 3

Thread: front hub

  1. #1

    Cool front hub

    Hi
    How hard is it to change the front wheel hub on 2006 lt silverado 4wd. I have a new hub but I don't know if I should tackle it. I have tons of tools being a plumber?

  2. #2
    Legend
    murdog94's Avatar
    Join Date
    Feb 2008
    Location
    Cloquet, Minnesota, United States
    Posts
    8,198
    Blog Entries
    12

    Default

    Its fairly simple you just have to disassemble the brakes, and i use an air chisel or regular chisel to pull the old hub bearing ou. But your best bet is to buy something like a haynes manual to change it so you have something that is step by step to refer to. and as i said it really isnt to bad of a job and you will save yourself $100 in labor! Oh and if its a 4X4 then you need a 36MM socket to remove the CV Axle.
    Mike

    Currently

    1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).

    2009 Saturn Aura XE (wifes car)

    2011 F-150 Crew 4X4

    "Hold it to the floor till you see God.... Then Brake!!!!"

  3. #3

    Default

    Thank going to attempt tommorow!

Similar Threads

  1. Chevy Trailblazer SS front end
    By asstda2b in forum Chevy Trailblazer Forum (GMC Envoy)
    Replies: 1
    Last Post: 11-20-2011, 10:57 PM
  2. Front bow tie
    By SoCal Chevy in forum Chevy Truck Accessories
    Replies: 33
    Last Post: 10-09-2010, 11:51 AM
  3. Next Question Can you swap out an '86 3500 front end to a '88 Front End?
    By newportcustomz in forum Lifted & Offroad Suspension
    Replies: 1
    Last Post: 05-30-2008, 11:03 PM
  4. front end-92 3/4
    By rexdavisson in forum General Chevy & GM Tech Questions
    Replies: 2
    Last Post: 05-27-2008, 06:07 PM
  5. SS Front End
    By asstda2b in forum Chevy Trailblazer Forum (GMC Envoy)
    Replies: 3
    Last Post: 12-21-2005, 02:59 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •