Results 1 to 3 of 3
10-04-2010, 01:08 PM #1
2005 Diff Fluid Replacement Question
I am a bit new to the GM Trucks, but I am pretty car savvy.
As I have found, to replace the Diff fluid, on a 1500 2WD model; I have to spin the bolts off the diff cover then drain it. What fluids do you recommend to refill it with? And how much fluid do I fill it with? Any clue what the torque specs are for the diff cover bolts?
Last edited by justinw2116; 10-04-2010 at 01:24 PM.
10-04-2010, 01:24 PM #2
I use Mobil 1 75/90 synthetics, 2-3 qts. I also after old fluid is out spray the inside of the housing with brake clean to get all the old fluid out. I then spin the rear to check the ring&pinion teeth. If everything looks good put on a new diff.cover gasket and reinstall and fill.
---------- Post added at 12:24 PM ---------- Previous post was at 12:24 PM ----------
Also welcome to the club.
10-04-2010, 01:25 PM #3
x2....On what Silveradotrailblazer has mentioned.
By ChevyBoy2009 in forum Maintenance & UpkeepReplies: 38Last Post: 01-17-2011, 04:44 PM
By blackrat in forum General Chevy & GM Tech QuestionsReplies: 9Last Post: 06-09-2010, 09:09 PM
By brtt485 in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 11-12-2009, 11:22 AM
By jt_5.7 in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 09-20-2009, 01:03 PM
By parks31 in forum GM PowertrainReplies: 7Last Post: 02-15-2008, 04:04 PM