Results 1 to 2 of 2
Thread: Steering column knock?
10-21-2010, 06:36 PM #1
- Join Date
- Jun 2008
- Beavercreek,OH (currently stationed in Jacksonville,NC)
- Blog Entries
Steering column knock?
Hey guys been forever since I have been on here, but would like to get back to being a regular here! Anyways, I seem to have a knock coming from the steering column when the wheel is turned or just idling down the road and running over small bumps? any ideas? I have no clue where to begin to look for the issue? thanks guys hopefully someone can shed some light on this!Justin - Beavercreek,OH
02 Z71 Ext. Cab (fully Loaded)
* 9" Total Lift (RoughCountry)
* 35' BF Goodrich Mud Terrain KM2s w/ 16" Chrome Pro Comp wheels
* Hypertech Maxx Energy Programmer
* K&N Intake
* BlackOut Tails
10-21-2010, 07:38 PM #2
- Join Date
- Sep 2010
- Far West, Oregon USA,
- Blog Entries
I did the search function up at the top & found this from another poster. Hope it helps.
There is a GM TSB (superseded several times) which addresses this issue. I have access to the latest TSBs (which apply to my '04 Silverado) via my ALLDATADIY.COM subscription, but I hesitate to post the entire thing here. At any rate, here's how it begins:
Steering - Underhood Clunk Heard/Felt in Steering Wheel
Bulletin No.: 00-02-35-003N
Date: March 26 2008
Clunking Noise Under Hood and Can Be Felt in Steering Wheel and/or Steering Column (Replace Upper Intermediate Steering Shaft [I-Shaft] Assembly)
2002-2006 Cadillac Escalade Models
1999-2007 Chevrolet Silverado Models (Classic)
2000-2006 Chevrolet Suburban, Tahoe Models
2002-2006 Chevrolet Avalanche
1999-2007 GMC Sierra Models (Classic)
2000-2006 GMC Yukon, Yukon XL Models
2003-2006 HUMMER H2
This Service Bulletin DOES NOT include Mid-Size Utilities such as Buick Rainier, Chevrolet TrailBlazer Models, GMC Envoy Models or Oldsmobile Bravada. Refer to Service Bulletin 02-02-35-006A or newer for Mid-Size Utilities.
This bulletin is being revised to add diagnostic information (refer to Diagnostic Tips) to check the lower steering column bearing as a potential source of the noise. Please discard Corporate Bulletin Number 00-02-35-003M (Section 02-Steering).
The entire TSB, including a step-by-step procedure, requisite precautions and tools, and detailed images, is posted (by a FORMER GM Parts and Service Mngr, named Mike) at the following link... I suggest a SAVE TO DISK complete with ALL IMAGES, once this page loads:1988 Chevy C-3500 2wd (no pic)
350 c.i. 5.7 L Stock Block, 4 Bolt Mains
L-31 Vortec Heads, Edelbrock Cam & Intake,
Holley 650, Flowtech Headers, Magnaflow exh.
Jet Trans 700R4, B&M Ratchet, 4:10 gears,
3" susp. lift kit "shadetree"
No rev limiter, No speed limiter lol
By jimmysierra in forum General Chevy & GM Tech QuestionsReplies: 0Last: 03-23-2010, 11:49 AM
By Waco in forum Chevy Silverado Forum (GMC Sierra)Replies: 3Last: 02-11-2010, 12:31 PM
By jimmysierra in forum General Chevy & GM Tech QuestionsReplies: 2Last: 02-07-2010, 01:12 PM
By g-man in forum Lifted & Offroad SuspensionReplies: 26Last: 08-27-2008, 01:41 PM
By ajkourafas in forum Lifted & Offroad SuspensionReplies: 3Last: 01-15-2008, 03:34 PM
Tags for this Thread