Results 1 to 9 of 9
11-08-2010, 06:42 PM #1
any suggestions on a good set of headers for a 07 4.8????
11-08-2010, 07:16 PM #2
It depends on what kind of headers you are wanting and what you are Looking to spend on headers??,
Long Tube headers,will give Better gains in H.P.....but your exhaust for the most part will need to be re-worked....and the Cost is more than shorty headers.
Shorty headers are for the most part a Direct Bolt-in to your exhaust.....but Small gains if any in H.P.
Some of the ones to look at.....Pacesetter.....JBA.....Doug Thorley......to name a few....
Last edited by 99'HEARTBEAT; 11-09-2010 at 12:13 PM.
5.3 l 3.73 l G80
BLACK BEAR CUSTOM TUNE
SNUGTOP l COLORMATCH l KATZKIN
11-08-2010, 07:28 PM #3
alright i was wanting the lt but idk that much about em and i was wanting to run around 3" pipe
11-08-2010, 10:48 PM #4
- Join Date
- May 2010
- Blog Entries
I was thinking about the same thing. I've already have a full exhaust but want some headers now. I couldn't find any long tubes though that would fit without some modification but if I get headers i want the performance the long tubes give ya.
2006 Duramax LBZ
4'' Diamond eye to 6'' tip
16'' ion alloy, 33'' fierce attitudes
Lots of work left to do!
11-08-2010, 10:54 PM #5
11-09-2010, 07:07 AM #6
Heartbeat is right. the Shorties are cheaper and easier to install but the gains are minor. I have talked to a tech guy at Summit and he suggested that if you want to run the LTs, that you should run a Y pipe as well. It looks to me if you include the Y pipe the modifications are minimal. These are the two parts that he suggested.
http://www.summitracing.com/parts/PSM-82-1177/2002 Chevy 1500 Ex-cab Z71: 5.3L, auto 4, shorties, hi-flow cats, true dual 2.5" straight pipes, AirAid intake, TBS, Platinum plugs, 8.5mm wires, programmer, 3in w/ 33s, also has the composite bed
2010 GMC 1500 Crew Cab Z71 w/ All Terrain package: 5.3L, auto 6, 2" Zone leveling kit, AirAid Jr. Intake Kit
11-11-2010, 04:17 PM #7
- Join Date
- Apr 2010
- sebastian, florida (currently stationed in central california)
check ou this site speedeng.com they have a good deal on a set of long tubes and a y-pipe for like $500. they are pacesetters but long tubes none the less and thats the best deal i have seen for long tubes. this will delete your cats but it will save you the extra money for someone to cut and weld your stock y-pipe to make the long tubes work...2000 single cab short bed 1500 w/ 6.0 vortec maxx swap from a 2006 2500, custom intake, 8mm wires, electric fan, muffler delete, 2/4 drop, asp pulleys, true dual through body exhaust, built trans w/ shift kit, custom tune by efi alchemy...302rwhp...
11-13-2010, 02:17 PM #8
pacesetter makes a nice set of longe tubes for our truck's. they have a think flange and you can also buy the y pipe with high flow cats and will bolt on to the factorry flange for the exhaust. I put a set on at my shop 3 weeks ago on a SS and they worked awesome. they were cheap also, less then 500$ in canada wich is awesome.
11-15-2010, 01:58 PM #9
I think I saw them on jegs for around 2 or 3 bills
By rackchaser71 in forum Performance & FuelReplies: 5Last Post: 06-18-2011, 12:13 AM
By Nickw059 in forum Chevy Truck AccessoriesReplies: 1Last Post: 12-09-2009, 01:28 AM
By Nickw059 in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 12-05-2009, 01:41 PM
By ki4kma in forum Performance & FuelReplies: 2Last Post: 07-05-2009, 05:35 PM
By z7177 in forum Chevy Truck AccessoriesReplies: 5Last Post: 05-10-2009, 10:17 PM
Tags for this Thread