GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 10 of 14

Hybrid View

  1. #1

    Default LOOK HERE!!! Trouble code...p1870.....for harsh 1-2 shifts.....

    If your Vehicle has....Harsh 1-2 Shifts.....and you have your Vehicle Scanned and Trouble Code.....P1870...Appears...the Below Link may apply to your Vehicle

    This is a G.M. Service Bulletin....
    TSB # 01-07-30-023A
    Harsh 1-2 Up-shift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Control Valve Body)
    1996 Buick Roadmaster
    1996 Cadillac Fleetwood
    1999-2000 Cadillac Escalade
    1996-2000 Chevrolet Camaro, Corvette
    1996-2000 Pontiac Firebird
    1996-2000 Chevrolet and GMC Light Duty Truck Models
    1996-2000 Oldsmobile Bravada
    with 4L60-E Automatic Transmission (RPO M30)
    Built Prior to January 15, 1999 (Julian Date 9015)
    This bulletin is being revised to update the Parts Information

    Please discard Corporate Bulletin Number 01-07-30-023 (Section 07 -- Transmission/Transaxle).

    CONDITION,
    .......Some customers may comment on a harsh 1-2 up-shift and the Check Engine Light or Service Engine Soon indicator is illuminated.
    Diagnosis,
    .......Typically, these vehicles will have been driven more than 32,000 km (20,000 mi) before this condition occurs.
    .......The scan tool may show a DTC P1870 set as a history code.
    ........A Harsh 1-2 Shift or DTC P1870, caused by wear in the..."Control Valve Body", may be difficult to duplicate when the transmission temperature is below 93C (200F).
    CAUSE,
    ......The condition may be due to wear in the control valve body. This wear occurs in the bore that contains the TCC isolator and regulator valves, and results in poor, or no, TCC apply

    IMPORTANT,
    ......DTC P1870 is a type B code. The conditions for setting the P1870 DTC must occur on TWO CONSECUTIVE TRIPS (ignition cycles, with a drive cycle) before setting a P1870 history code.
    ......When the conditions for setting DTC P1870 are met (first trip), the PCM commands maximum line pressure and harsh 1-2 shifts are the result.
    ......This may result in a harsh 1-2 shift with no history code if the conditions for setting the DTC required for the second trip are not met, on two consecutive trips (Ignition cycles, with a drive cycle).
    ......When the conditions for setting the DTC are met, on the second consecutive trip, a DTC P1870 is stored as a history code.
    ......When the P1870 code is stored, the PCM will turn on the Service Engine Soon (SES), ......Check Engine Light (CEL), or Malfunction Indicator Lamp (MIL).

    CORRECTION,
    Install a control valve body with the revised TCC regulator and isolator valves. These valves are used in all transmissions produced after January 15, 1999 (Julian Date 9015), and all of the service parts currently available through GMSPO contain revised TCC regulator and isolator valves.

    Also,
    ......If all of the following conditions are true, it is not necessary to rebuild the transmission or to replace additional transmission components beyond the "Control Valve Body".
    .......Transmission operation is normal before the transmission reaches operating temperature, or before DTC P1870 is set (no slips, flares, or missing gears).
    ......The torque converter is not blue or overheated.
    ......The transmission fluid is not burned or has no burned odor.
    ......The transmission fluid pan contains no abnormal debris (clutch material, bronze, brass, or metal fragments).
    Last edited by 99'HEARTBEAT; 12-26-2013 at 01:47 PM.

    MIKE


    99"SILVERADO
    5.3 l 3.73 l G80
    BLACK BEAR CUSTOM TUNE
    SNUGTOP l COLORMATCH l KATZKIN










  2. #2
    Legend
    murdog94's Avatar
    Join Date
    Feb 2008
    Location
    Cloquet, Minnesota, United States
    Posts
    8,198
    Blog Entries
    12

    Default

    Thanks for the additional info, and from reading this it seems like every 4L60E that i owned had that problem!!
    Mike

    Currently

    1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).

    2009 Saturn Aura XE (wifes car)

    2011 F-150 Crew 4X4

    "Hold it to the floor till you see God.... Then Brake!!!!"

  3. #3
    Jr. Apprentice
    Join Date
    Dec 2010
    Location
    Brampton, ON Canada
    Posts
    27

    Default

    Had my 2011 Reg Cab 4x4 4.8 4l60E harsh 1-2 shift fixed today. Although my check engine light did not come on, I did retrieve a P0961 code, that is after I went out and bought a OBD2 reader that was CAN enabled. Anyway it turned out to be connector X175 not seated properly. Likely any other trucks that went by the same assembler may have had the connector not properly seated.

  4. #4

    Default

    Where the hell is connector X175

  5. #5

    Default

    Damn I wish I found this thread before! My trans is sitting on the floor of my garage in bits because of this code!!!! Oh well, may as well do it all now. 11 hours get that sucker out!

  6. #6

    Default

    i have the same issue with hard 1-2 shift and i have the new control valve body to replace it with. My 2000 chevy 1500 C/K 4X4 has an issue i have noticed where at around 50 mph with accelerator depressed just enough to maintain constant speed my engine surges a little, maybe 100-500 rpm. it will surge and surge every few seconds untill i either speed up or let off the accelerator. will replacing the control valve body fix this problem too?

Similar Threads

  1. Replies: 3
    Last Post: 08-29-2010, 07:39 PM
  2. trouble code 171
    By snascar29 in forum Chevy Colorado Forum (GMC Canyon)
    Replies: 1
    Last Post: 12-10-2009, 06:38 PM
  3. trouble code
    By challutz in forum Chevy C/K Truck Forum
    Replies: 2
    Last Post: 11-21-2009, 07:37 AM
  4. Trouble code
    By T1743 in forum GM Diesel & DuraMax
    Replies: 1
    Last Post: 11-21-2009, 02:11 AM
  5. P1870 code help
    By daddytech in forum General Chevy & GM Tech Questions
    Replies: 1
    Last Post: 06-15-2009, 08:15 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •