Results 1 to 5 of 5
11-29-2010, 05:46 PM #1
98 tahoe clicking noise from front end ???
Ok so I have a 98 2dr tahoe and sometimes when i increase speed it has a loud clicking or clunking noise that comes from the front end... more towards the right side i think. I can feel it to a little bit in the floor. The sound is rotational. most of the time its only when going up a hill but its not limited to that
any ideas? anyone have the same thing?
I know we got some GM techs on here hope some will come forward haha
11-29-2010, 06:25 PM #2
- Join Date
- Sep 2010
- Far West, Oregon USA,
- Blog Entries
Nope, no GM techs here, only us stupid Ford guys
Do you ever notice this clicking when you're making a sharp turn??1988 Chevy C-3500 2wd (no pic)
350 c.i. 5.7 L Stock Block, 4 Bolt Mains
L-31 Vortec Heads, Edelbrock Cam & Intake,
Holley 650, Flowtech Headers, Magnaflow exh.
Jet Trans 700R4, B&M Ratchet, 4:10 gears,
3" susp. lift kit "shadetree"
No rev limiter, No speed limiter lol
11-29-2010, 06:31 PM #3
I'm going with engine/transmission mounts at this point, with flex plate as my standby......
I doubt it's CV shafts, unless it's in 4wd.
Does the noise go away when you stop accelerating?When you hear hoofbeats, look for horses not zebras.
11-29-2010, 06:59 PM #4
Brakes , wheel bearings, CV shafts, and all the above !!!...what truck is it ?? 4X4 or no ???? Also what makes u think its the front ....i had a raddle in the front before and found out it actually came from the driveshaft in the rear..lol
1996 Suburban K3500 SLT DUALLY
1988 Camaro RS 383 stroker LT1
1992 32' Aero-tek Race Boat, 600 CI BBC
WE CAN STICK A DIESEL IN ANYTHING
SPECIALIZED IN CUSTOM CONVERSIONS OF ANY KIND
11-30-2010, 10:27 AM #5
ok sorry for not giving more info. it is 4x4. and it has new cv shafts, new wheel bearings, new front calipers pads and rotors, new ball joints... all as of june. we just got the truck and i think the previous owner did all that to try to fix the problem. (f*ck*r left this part out when i went to buy it.... he told me later about replacing all the parts)
when i stop accelorting it usually stops. I aqm 99% sure its coming from the front. even heard it once from outsite the vehicle. and it usually only happens when i am going straight.
When i first heard it, i thought it was the stock center huds on the stock rims because they didnt fit in tight and snug. but now i have aftermarket rims on and still hear it.
By lgsmith10 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 4Last Post: 08-27-2009, 06:14 PM
By Tamalero in forum GM PowertrainReplies: 2Last Post: 08-18-2007, 07:19 PM
By Scott_in_AZ in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 1Last Post: 07-22-2007, 02:21 PM
By tnbill in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 2Last Post: 06-27-2007, 08:34 AM
By ashndon in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 3Last Post: 08-26-2006, 11:02 PM
Tags for this Thread