Results 1 to 2 of 2
11-27-2010, 08:06 PM #1
Testing Trans Fuse..... Need help!!!
Some have read my transmission problems and tach issues in my other post. After searching on here a solution could be a bad ignition switch. From what I have read you hook your meter to a ground and the trans fuse. I did this, When the keys are in the ON position but not started yet I get a reading of just under 5 (meter is set at 20V). When I START the burban it wonders a bit. Sometimes it drops to the 2.7 range. I was told this shouldnt drop under 9V. Am I testing it wrong???Jesse from AZ!!!!
95 Suburban 4x4
11-28-2010, 11:16 AM #2
By camarojunkie in forum General Chevy & GM Tech QuestionsReplies: 0Last: 11-26-2009, 10:21 AM
By b_burdine in forum General Chevy & GM Tech QuestionsReplies: 1Last: 11-04-2009, 07:18 PM
By TRPLXL2 in forum The Coffee Shop ~ Chit ChatReplies: 21Last: 05-15-2009, 11:11 PM
By Paul in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 5Last: 02-02-2009, 08:32 PM
By ChevyFan in forum The Coffee Shop ~ Chit ChatReplies: 15Last: 12-17-2008, 07:35 AM
Tags for this Thread