Results 1 to 2 of 2
11-29-2010, 08:36 PM #1
- Join Date
- Nov 2010
mounting 2 inch hitch to stock step bumper
picked up hitch from ebay that mounts to step bumper class 3 hitch .what size/grade bolts should i use
11-30-2010, 12:35 AM #2
Several months ago I bought a used '04 Silverado w/stock bumper, shortly thereafter I bought and mounted (no drilling required) a 2" receiver hitch.
All hardware was supplied with the hitch... and BOLTS for the already tapped-holes in the bumper and frame went right in with no problem. Here's the instruction sheet, for the hitch which I purchased:
Take a look at the PDF file to which I linked above.
If these are the BOLTS of which you speak, it indicates that those bolts are: M14 X 2.00 X 40mm and that they should be tightened (with a torque wrench) to 115 Ft. Lbs. (156 N*M)
By chevymanlobo in forum Lifted & Offroad SuspensionReplies: 2Last Post: 09-11-2010, 11:18 AM
By hall1836 in forum Chevy Silverado Forum (GMC Sierra)Replies: 5Last Post: 06-23-2010, 03:45 AM
By hutch_pt in forum Chevy Truck AccessoriesReplies: 1Last Post: 01-08-2010, 04:56 PM
By Lrrryo in forum Lifted & Offroad SuspensionReplies: 3Last Post: 05-01-2009, 12:49 AM
By monabaker in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 2Last Post: 04-05-2007, 06:12 PM