Results 1 to 2 of 2
12-06-2010, 08:34 PM #1
- Join Date
- Dec 2010
94 2wd silverado engine wiring harness...???
I need a engine wiring harness 5.7 350 (mine has been cut from theft) and i found some 4x4 94s but didnt know which ones are compatible. most people say it requires that exact model. i would be very thankful for any help on which ones work .thanks
12-07-2010, 07:44 AM #2
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
The 4WD will have a connector that runs down to the Thermal Actuator, and one that goes to the floor shifter for the 4WD.. you would be better off finding one from a 2wd truck with an Auto tranny, however it can be from a C-series (2wd) truck (1500, 2500, 3500) with any motor V-6, 305 V-8 (5.0L), and 350 (5.7L). The connectors are the same for those motors. As LONG AS IT IS FROM AN AUTO TRANNY, or manual if you own a manual tranny. Basically it just has to come from a 2wd that has the same tranny that you have....
And it is VERY easy.. oh and it has to be from a 1994 since that is the year they changed over to the 4L80E which has different connectors than the 700R4.Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
By eddy_764 in forum General Chevy & GM Tech QuestionsReplies: 9Last Post: 10-15-2010, 02:21 PM
By BigRed07 in forum Audio, Video & Gadget TechReplies: 1Last Post: 06-24-2010, 11:27 AM
By oohyeah4 in forum Audio, Video & Gadget TechReplies: 10Last Post: 03-02-2010, 09:14 PM
By ONETONMIKEK30 in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 12-08-2008, 11:01 AM
By dcmock in forum General ClassifiedsReplies: 2Last Post: 03-01-2008, 12:32 PM