Results 1 to 1 of 1
12-12-2010, 04:07 PM #1
H E L P ..Question about gears in a 4X4 !!!!!! H E L P ..
as some of u guys can see i have a 1996 K2500 with a 14 bolt 1 ton rear end.
NOW.... i am doing a diesel swap and need to change the gears in the front and rear, which options do i have other then 4:10..which i have now ???!!!!!
I was thinking somewhere on the line of 3:50ish ????
Does anybody know what GM or so made to stick in there ????
Please remember that its a 4X4 and they have to match and the front is a 12 bolt diff...rear is a 14 bolt full floater 1 ton axle !!!!!!!
LET ME KNOW PLEASE !!
PS, the story behind this is i dont want to loose much pulling power ..but i also dont want to just go 65 MPH on the highway !!!!
I am thinking either a 3:42 or 3:73....but i dont know if i can find them for a 4X4 in my aplication so they match up.
This is basicly the question i am asking and if so , where to find them !!!!!!?????
Last edited by DAREDEVIL; 12-12-2010 at 04:30 PM.
1996 Suburban K3500 SLT DUALLY
1988 Camaro RS 383 stroker LT1
1992 32' Aero-tek Race Boat, 600 CI BBC
WE CAN STICK A DIESEL IN ANYTHING
SPECIALIZED IN CUSTOM CONVERSIONS OF ANY KIND
By Winchester in forum Member IntroductionsReplies: 3Last Post: 11-27-2010, 11:35 PM
By JTx9 in forum Performance & FuelReplies: 2Last Post: 11-03-2010, 09:00 PM
By larryleeUSN in forum Lifted & Offroad SuspensionReplies: 17Last Post: 06-23-2009, 10:22 AM
By phoebeisis in forum GM PowertrainReplies: 6Last Post: 12-14-2007, 11:12 AM
By Steve in forum Chevy Trailblazer Forum (GMC Envoy)Replies: 6Last Post: 08-08-2006, 09:48 PM
Tags for this Thread