GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 11

Thread: Glove Box Codes

  1. #1
    Sr. Apprentice
    Join Date
    May 2007
    Location
    Lenexa, KS
    Posts
    42

    Default Glove Box Codes

    I've read that there's a sticker in the glove box that tells you the options each truch had coming off the assembly line (Service Parts Identification sticker). I looked and it's there of course. Does anyone have the list of what these codes mean??

    I'm specifically looking to see what gear ratio my truck has...

    for reference, I have a 93 K2500 4x4 if that helps. Thanks!
    Last edited by 93BURB; 06-02-2007 at 12:13 AM.
    1993 Chevrolet Suburban
    K2500 4X4 w/ 7.4 L 454

  2. #2

    Default

    The list is long, very, very long.

    Someone on here has already posted all of them, it took pages and pages.

    I will see if I can find it later if no one beats me to it.

    Now I have to finish my coffee, work on the horse trailer and pick up a garden tractor.

    Technology is great, when it Works,
    And one Big Pain in the Ass When it Doesn’t.
    Detroit Iron Rules, All the Rest are Just Toys.
    94 GMC Burban, 5.7L (350), 4X4, Auto
    86 GMC Burban, 350, 2 WD, Auto
    79 GMC pickup plow truck, 400, Full time 4X4, Auto
    86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
    See a Pattern yet?

    15 year GM assembly line worker.

  3. #3



    Jamie

    2007 Ford E250(Work van) (Ya, Ya, shut up!)
    1996 GMC Sierra SLE 1500 5.7L/4L60E

  4. #4
    Legend
    TrailLeadr's Avatar
    Join Date
    Jun 2005
    Location
    Coventry, Rhode Island
    Posts
    3,103

    Default

    You can download a 188page pdf, and go through the list at your leisure.

    Besides that link doesn't even scratch the surface of the codes.
    Patrick
    Rhode Island


  5. #5

    Default

    Quote Originally Posted by TrailLeadr View Post
    You can download a 188page pdf, and go through the list at your leisure.

    Besides that link doesn't even scratch the surface of the codes.
    Oh ya I forgot you had that list. I was looking for that. Again you are my Hero!

  6. #6

    Default

    Quote Originally Posted by Cableguy View Post
    Oh ya I forgot you had that list. I was looking for that. Again you are my Hero!
    That figures, I downloaded that a while ago and forgot all about it. Thanks guys for jarring my memory, what little there is left.

  7. #7
    Sr. Apprentice
    Join Date
    May 2007
    Location
    Lenexa, KS
    Posts
    42

    Default

    Good lord that's a lot of information. Thanks guys for your help, you rock!!

  8. #8

    Default

    speaking of options, my burb has a sticker on the engine that says it has remote start????? The previous owners told me nothing about it. What should i look for to figure out this Scooby mystery?
    Dan
    1999 GMC Sierra 2500 350 vortec
    1967 Jeep M725 ambulance 230 tornado
    1990 Cherokee Limited- 3 inch lift on 33's
    ...and every one of em has issues

    If you have any questions or problems don't hesitate to send me or any other GMTC moderators a PM

  9. #9
    Legend
    TrailLeadr's Avatar
    Join Date
    Jun 2005
    Location
    Coventry, Rhode Island
    Posts
    3,103

    Default

    Quote Originally Posted by 95CTburb19 View Post
    speaking of options, my burb has a sticker on the engine that says it has remote start????? The previous owners told me nothing about it. What should i look for to figure out this Scooby mystery?
    Maybe the previous owner didn't know about the remote start.(doubtful) Or it may have been removed. Look for a safety switch along the front of the engine bay that would contact the hood when closed. Usually looks like like a stick.



    Most places/people put the remote starter module under-inside the dash on the driver's side. The module will more than likely have a name brand on it.
    The area under the dash is usually quite open, so you should be able to spot a remote start module pretty easy.
    Last edited by TrailLeadr; 06-03-2007 at 09:26 AM.

  10. #10

    Default

    Quote Originally Posted by 95CTburb19 View Post
    speaking of options, my burb has a sticker on the engine that says it has remote start????? The previous owners told me nothing about it. What should i look for to figure out this Scooby mystery?
    I beleive theres a mechanics safety switch under hood (with reomte starters)so car can't be started for his safety. Which requires a sticker under hood so he doesn't spend all day figuring out why it won't start with hood up LOL

    Oops sorry Patrick I didn't see ya in here answering, cool.

Page 1 of 2 12 Last Post byLast Post by

Similar Threads

  1. K1500 noise behind glove box
    By engineerbrian in forum General Chevy & GM Tech Questions
    Replies: 5
    Last: 07-26-2010, 03:21 PM
  2. WTB: Glove Box Door, Seats
    By propilot82 in forum General Classifieds
    Replies: 2
    Last: 03-10-2010, 12:48 PM
  3. Silverado glove box lock??
    By Oad2Dzl in forum Chevy Truck Accessories
    Replies: 0
    Last: 09-17-2009, 08:40 PM
  4. A couple of tools to keep in the glove box
    By Dr_Zero in forum How-to Guides
    Replies: 29
    Last: 09-14-2009, 08:02 AM
  5. L31 Glove Box Code... Is this right?
    By i_build in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 3
    Last: 04-04-2009, 03:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •