Results 1 to 10 of 17
Thread: HID issues...
12-20-2010, 08:56 PM #1
i was wondering if any one else has had any issues with there hids. im not sure if its the kit i bought or what but my lights will flicker and some times cut off completely if i go over a small bump or dip in the road. any ideas?2000 single cab short bed 1500 w/ 6.0 vortec maxx swap from a 2006 2500, custom intake, slotted brakes, shorty headers, 8mm wires, electric fan, strait piped, 4.5 inch lift, asp pulleys, true dual through body exhaust, built trans w/ shift kit, custom tune ... 320rwhp
12-20-2010, 09:20 PM #2
Sounds like a bad electrical connection somethere... Also, make sure your ballast is mounted securely...
Tim a.k.a. Da' Boulder
2003 Chevrolet Avalanche Z71 - Custom Emergency Response POV
Firefighter, Fire Policeman, Ambulance Driver, Rescue Tech, Emergency Lighting Installer
Tint, 20's, Bull Bar, Intake, Exhaust, Billet Grill, Stereo, Custom Console, Emergency Equipment, and the list goes on...
12-20-2010, 10:20 PM #3
thats what i cant figure out because everything i can physicaly do to secure them has been done...i even had the shop i got them from look at them and they couldnt find an issue... the only thing i can think of is the kit sucks, the kit i had on my last vehicle was made by another company and it diddnt require an alternate relay switch like this one it just conected directly to the stock wiring
12-20-2010, 10:33 PM #4
Possibly something inside the ballasts is loose or something. Try switching the ballasts out, get new ones from the shop you got them from if you have to.2010 Equinox LT
2.4, 6 speed auto, power lift gate, remote start, bluetooth, xm.
1995 Cheyenne C1500 ext. cab(my baby, my first truck)
5.0, 5 speed, Silverado appearance package, power nothing, bucket seats and console Silverado, painted black interior, eBay halo headlights, eBay chrome tails, eBay cai, dual Flowmaster 40's w/no cats, 15x7 American Racing Hopsters, Walmart fog lights, SS mirrors
12-21-2010, 02:32 AM #5
thats whats gonna piss me off... i havent had the kit for a year yet and there already messing up... i thinik its about $40 for each balast
12-21-2010, 02:49 AM #6
Your kit doesn't have any type of warranty...?
12-21-2010, 05:29 AM #7
If you are using a relay kit, try replacing your relay. I think it is a possibility that the mechanical parts in the relay could be a little off and a bump could cause your relay to cut out. Also, does your relay kit use plugs to connect to your headlight connectors, or is it tapped into the wiring? The reason I ask this is that on my truck, I was having some more severe issues with my HIDs than normal, and one night they wouldn't even fire. My splice was fine and looked fine, but what happened was that the stock headlight wiring on my truck was so thin and flimsy that both the power and the ground wires broke off while I was trying to figure out what was going on. Everything looked OK, but the wires were broken at the splice. Check that too. If nothing else, than check your ballasts. Good luck.
2008 FORD F350. My new all-around truck.
2001 Silverado Reg. Cab Not-So-Base -- SOLD
2003 Avalanche Z71. No Cladding. Check out my Mod thread. - Crashed. Will be rebuilt soon.
1974 Triumph Spitfire 1500 - Work in Progress
2003 Sierra 3500 Duramax. The Newer, Better Work Truck -- FOR SALE
12-21-2010, 12:57 PM #8
When I put a set on the silvy, I will def purchase relay kit with HID kit and install together.2010 Silverado Z71 Ext. Cab - Blue Granite Metallic
RC 2'' - Nitto - Volant - Magnaflow - Blackbear
2004 Olds Alero - Daily Driver/Beater
2007 Can Am Outlander 400
12-22-2010, 01:45 AM #9
triton- from what the shop told me,no they do not...
what i noticed to when they completley cut out was over little bumps it would cut out or flicker... but when my tuck shifts gears it doesnt do anything, which i find strange because the shift kit in my truck will chirp the tires from first to second... im about to just take the kit off
12-27-2010, 12:57 AM #10
The lamp could not work well for several reasons,either the lamp is not seated in the socket properly and firmly, or the lamp can be defective. And also the ballast may be defective. You can swap the ballast on each side to make sure which part is defective.This may be a magentic core/coil type transformer, or it may be a small box with electronic parts inside.
A loose wire at the lamp socket or the ballast will also cause a lamp no work.
Cold will cause to flicker, in the unlikely event the light is subjected to a cold atmosphere.
some truck models dont need relay harness... so if it is ur HID kit is totally sucks, just replace it with a plug-and-play type from http://www.vvme.comlive by heart...
By Snoopius in forum Chevy C/K Truck ForumReplies: 19Last: 10-08-2012, 12:38 PM
By HDCLINT7 in forum General Chevy & GM Tech QuestionsReplies: 0Last: 09-17-2009, 05:24 PM
By Crakums_GT in forum General Chevy & GM Tech QuestionsReplies: 1Last: 06-17-2009, 11:21 PM
By hutch_pt in forum Lifted & Offroad SuspensionReplies: 5Last: 05-10-2009, 03:36 PM
By Swatchvy in forum Lifted & Offroad SuspensionReplies: 9Last: 03-10-2009, 05:36 PM
Tags for this Thread