GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 6 of 6
  1. #1

    Default Water pump dead, now gauges out?

    So 5 miles from my home tonight, my water pump decided to crap out. No warning until I came to a stop and heard some squealing. Checked gauges, nothing wrong yet. 1 mile later I realize I no longer have heat.

    I kept driving home, no problems. I parked the truck and turned it off once I saw where the leak was. Now, when it starts, I have no gauges working at all. Truck starts fine, everything runs fine, just no gauges.

    Is it possible water spraying around would short gauges sending units out? Is there some other reason now my gauges are dead?

    Guess I'll get to change a water pump out over christmas.

  2. #2
    Legend
    stephan's Avatar
    Join Date
    Sep 2010
    Location
    Far West, Oregon USA,
    Posts
    8,610
    Blog Entries
    1

    Default

    I don't see how spraying water from your wp could take out your guages. Unless belts, pulleys & various pieces were flying around up front ripping wires off the sensors then it's gotta be a different problem.
    1988 Chevy C-3500 2wd (no pic)
    350 c.i. 5.7 L Stock Block, 4 Bolt Mains
    L-31 Vortec Heads, Edelbrock Cam & Intake,
    Holley 650, Flowtech Headers, Magnaflow exh.
    Jet Trans 700R4, B&M Ratchet, 4:10 gears,
    3" susp. lift kit "shadetree"
    No rev limiter, No speed limiter lol


  3. #3
    Legend
    murdog94's Avatar
    Join Date
    Feb 2008
    Location
    Cloquet, Minnesota, United States
    Posts
    8,198
    Blog Entries
    12

    Default

    Year make and model as well would help us out..
    Mike

    Currently

    1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).

    2009 Saturn Aura XE (wifes car)

    2011 F-150 Crew 4X4

    "Hold it to the floor till you see God.... Then Brake!!!!"

  4. #4

    Default

    First place I would check is the fuse panel. There is often a gauge specific fuse and I would not discount the possibility that water under the hood could have shorted out something and blown a fuse.

  5. #5

    Default

    Sorry, forgot I don't have my signature here.

    2004 Silverado 1500 4wd.

    I'll be pulling the pump out tomorrow and I'll poke around the fuse panel.

  6. #6

    Default

    Got the water pump and clutch fan swapped out today. The dash cluster is still acting up. On a cold start, it works right away. However if I restart after the truck is warmed up, the cluster will not work for about 2-3 minutes after start up. No dash lights, gauges, odometer, etc. After th 2-3 minutes, it does come on, and goes through the entire start up sequence with the warnings and stuff.

    Oh well, maybe after the blizzard I'll look more into it. For now, my goal of getting the truck back up and running prior to the storm was met.

Similar Threads

  1. dead in the water!
    By DonnieB in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 7
    Last: 11-29-2010, 04:12 AM
  2. water pump
    By 250rman79 in forum General Chevy & GM Tech Questions
    Replies: 1
    Last: 10-31-2010, 03:43 PM
  3. Dead Gauges and Battery?
    By crypea in forum General Chevy & GM Tech Questions
    Replies: 3
    Last: 10-09-2010, 02:09 PM
  4. 96 s10 Fuel, Water Temp and Voltage Gauges dont work!
    By rx7srlife in forum Chevy S10 Forum (GMC Sonoma)
    Replies: 0
    Last: 12-13-2009, 10:38 AM
  5. WTB: Water pump
    By 95burban in forum General Classifieds
    Replies: 0
    Last: 01-11-2009, 04:15 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •