Results 1 to 3 of 3
12-23-2010, 06:33 PM #1
- Join Date
- Dec 2010
Lift plus Leveling kit needed for Moto metal 18's and 34" trail grapplers
I have a 09 silverado 4 door 4x4 with a 2 inch level in front and have 33.3 inch coopers on factory 18's. I would like to put the 34.5 inch trail grapplers on for sure, rims not necessarily but considering moto metal 950's. Just ordered a different 3 inch level for front and 2 inch for rear. How can i make this work. 33's fit great no problem but want the 34 grapplers. thinking of adding a 1.5 inch body lift to make it all work. any advice?
12-23-2010, 09:12 PM #2
Go with the Zone 1.5" BL and just be done with it.
________2013 4C Rated__________
12-23-2010, 09:26 PM #3
- Join Date
- May 2010
- Blog Entries
Well sounds like you should put on the 3'' leveler you ordered and then your new wheels and tires and see if it fits. If not put your old back on then install the body and you'll be lookin nice!
2006 Duramax LBZ
4'' Diamond eye to 6'' tip
16'' ion alloy, 33'' fierce attitudes
Lots of work left to do!
By Tidmore in forum Lifted & Offroad SuspensionReplies: 18Last Post: 02-28-2011, 08:21 AM
By black-ltz in forum Lifted & Offroad SuspensionReplies: 1Last Post: 03-18-2010, 01:44 AM
By DSpivey in forum Lifted & Offroad SuspensionReplies: 0Last Post: 03-03-2010, 08:58 PM
By nickpatton_189 in forum Lifted & Offroad SuspensionReplies: 7Last Post: 02-22-2010, 01:40 AM
By nickpatton_189 in forum Lifted & Offroad SuspensionReplies: 4Last Post: 08-11-2009, 09:49 AM
Tags for this Thread