Results 1 to 4 of 4
Thread: cause of knock sensore?
12-28-2010, 07:56 AM #1
cause of knock sensore?
im getting a reado out code for my knock sendor's what would cause this. and is there a cure for this. i know i have to change them. but if i change them what the likely hood of them just going off again?2005 silverado 1500 z-71.
fabtech 6" lift.
air raid filter
throttle body spacer
rancho rs5000 shocks.
american racing rims.
firestone destination a/t 325/65/18.
due to inflation your 2 cents no longer matters.
12-28-2010, 11:14 AM #2
If I understand correctly... your knock sensor is a microphone that resides at the bottom of the engine block, submerged in coolant. It listens for abnormal sounds and tells your timing to retard when it hears something that doesn't sound right. It could be something going on with your engine, but it can also be nothing, as the microphone cannot determine nature of weird sound.
I had an intermittent knock sensor code on my burb, but then suddenly stopped. When I crawled under to look, I discovered the connector was unplugged and shredded up. You may want to take a peek under and check that the connection is plugged in securely to sensor. It's probably not the issue in your case, but easy enough to check and rule out.~Janet~My rig: 1993 Suburban K2500 & 16ft stock trailer.
12-28-2010, 01:24 PM #3
in the 5.3 my knock sensore is under the intak manifold.
02-26-2011, 12:28 AM #4
- Join Date
- Feb 2011
They are under the intake and they are NOT threaded into coolant holes. The intake isn't that hard to change.
By kdr358 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last Post: 01-15-2010, 06:03 PM
By silveradokid in forum GM PowertrainReplies: 4Last Post: 01-15-2010, 10:27 AM
By uk mac in forum Chevy C/K Truck ForumReplies: 1Last Post: 12-12-2009, 11:32 PM
By avionics in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 06-06-2009, 01:29 PM
By treefarmer in forum GM PowertrainReplies: 2Last Post: 01-27-2008, 04:45 PM